Xtool X100 Pad tablet can’t start after update (Fixed)


After update XTool X100 PAD tablet key programmer, it stopped booting and didn’t start.

Before that the screen displayed system update I download, then the tablet had self reset and turn on. Then the screen displayed only

Xtool logo and don’t run Android system.
screen - displ-ayed -only-1 screen - displ-ayed -only-2

xtool x100 pad error after update

xtool pad2 error can not start

Solution provided by xtooleshop.com:

Donwload the Xtool X100 pad tablet firmware reflash file

Paste the above file on the desktop, plug the X100 Pad to the computer.

Contact Xtool factory engineer for remote assistance via Teamviwer

The engineer will help reflash the firmware.

Good luck

How to program key fob for Dodge Challenger 2011 by XTOOL X100 PAD?

Here is a guide to show you: How to program key fob for Dodge Challenger 2011 using XTool X100 PAD? Steps are easy as below:

First, connect XTOOL X100 PAD Car Key Programmer with Dodge Challenger via the Bluetooth VCI Box plugging into car OBD port.


Next, turn on car ignition, power on XTOOL X100 PAD and open main menu.

Go to “Immobilization”, find “Dodge” then select “Dodge 08-12”.


Choose “Read security code” to calculate the pin code firstly.

Soon you get the Dodge Challenger pin code “1069” as below:

Then, back to choose “Program new key”.

Follow the instructions: turn off car ignition, insert the new key you want to program then turn ignition on.

And you need to enter the pin code “1069”.


It starts to program the new key, be patient to wait the process complete.

When you see the message “Program success”, it means XTOOL X-100 Pad Key Programmer successfully make a new key fob for Dodge Challenger!


Tested XTOOL X100 Pad read 2015 Ford Fusion pin code make key OK

It’s tested OK to read pin code and make new remote key for 2015 Ford Fusion by using XTool X100 PAD Tablet Key Programmer. Steps are as follows. Hope it helps!
Step1. Connect X100 PAD with car via OBD port then open main menu, choose “Immobilizer” to “Ford” to “China Ford” to “Smart Key System”. Since Ford Fusion (US) is same with Ford Mondeo (EU) now, you choose “Mondeo 2013-”.
Step2. Choose “Read Security Code” and wait it complete.

XTOOL X-100 Pad key programmer read Ford Fusion pin code done! Hit “OK” to continue other operations.

Step3. Now you choose “Add a key” and follow the tips. It will need you to open and close the driver door then turn off ignition, after that hit “OK”.

Put the new key you are going to program into the card slot (slot in hand box), turn on ignition then hit “OK”.

Step4. XTOOL X100 Pad program Ford Fusion a new remote key successfully! You can check the key number now is 1 and car dashboard will show you “Key Program Successful”.