Piwis 3 Compare With Piwis Tester 2

As the Piwis 3 for Porsche diagnostic & programming released, most client inquiry for the Piwis 3 to replace Piwis tester ii for Porsche new models. Some client asks what’s the difference between Piwis Tester II & Piwis 3. whether the Piwis II work with the Piwis 3 software? Below CnAutotool.com share one client opinion for this.
Porsche Piwis 2 or Porsche Piwis 3?

 

It may be an interesting subject, I’m sure there is some information about this out here.

First of all, the Piwis 2 interface is a lot more robust piece of equipment, compared to the cheesy and flimsy looking and feeling interface produced by Actia for Piwis 3.

Originally designed for the VW ODIS system, the VAS 6154 VCI is quite the service needy piece. [Breaks easily] not a hard comparison to make.
Is it worth to purchase Piwis 3 replace Piwis 2 now? Can the Piwis 2 compatible with Piwis 3 Software?

This answer for the question of whether Piwis 3 software can work with Piwis II Samtec HSX Interface ?

Secondly, I thought the Piwis 3 for Porsche went cheap. [my humble opinion, way below Porsche standard!]

At the same time, there is a service from Poland and Ukraine [If I remember correctly] that can make the Samtec based Piwis 2 VCI , to work with Piwis 3.

Unfortunately, their charges are just as much and frankly cost prohibitive as the New Piwis 3 VCI. 2-3-4 thousand dollars for these VCIs is simply not reasonable for small operators.

They will come down in price just like the Chinese VCIs did for all manufacturers as the markets get saturated and folks are not buying them as eagerly as at the beginning of the Piwis 3 had.

They will get as much money as the market bares. [as much as people are willing to pay]

Your more pointed answers will not come in this tread Ibi. This is Cars Fan’s money-making tread, he will not volunteer any information, but if U start your own tread, U may be more likely to find out stuff.

Regards,

What Do the Piwis 3 updates replace Piwis 2?

Diagnostics application is used for communication with control units. You can search for, identify, code and control program units, read out the event memory, execute complex processes, change drive links and execute routines.

Guided fault finding (GFF) generates a test plan for a fault code. This test plan shows the best sequence for carrying out tests. GFF compiles a list of recommended tests, documents and wiring diagrams

Actual values/input signals functions display you the actual values and input signals of control units

Drive links/tests function displays the drive links of control units, allows you to change the parameters of these drive links and run test routines for individual control units

Maintenance/repairs function group – use this function to call up control unit-specific processes that cannot be implemented generically from the ODX data

Coding/programming function group – use this function to write coding values. Piwis 3 can code Values automatically or set manually. This function group includes (Automatic coding, Manual

coding, Customer-specific settings, and Factory settings) coding modes

Logging – use this function to activate logging for diagnostics, guided fault finding (GFF) and measuring equipment applications. Temporary and permanent working log can be created

Filter – use this function to limit the view of the control units installed in the vehicle. In the diagnostic application, you can create, edit, activate, deactivate or assign filters

Wiring diagrams application is the representation of physical connections and layouts of circuits

Measuring equipment interface work for DC and AC voltage measurement, direct and alternating current measurement, diode testing, resistance measurement, continuity/open circuit testing, showing voltage, current and resistance over time (oscilloscope function)

Piwis 3 Software V37.900 Download & Installation Guide

Piwis III Software Update to V38.500 for Porsche Piwis tester 3 already. most client from Europe get Piwis 3 hardware, wanna try to Porsche Piwis 3 software for test. Below CnAutotool.com share Piwis 3 V37.900 software download with Piwis 3 Keygen for Porsche PT3G Piwis tester 3.

Kindly Note: We only get the Piwis 3 v37.9 Software download with Piwis 3 Keygen resource to share here.

Do not responsibility for free installation & solved your compatible problems

Piwis – Software – Download – amp

Big thanks to Damien
How do you use Piwis 3 keygen:

This is the method you can try:

Make sure PIWIS 3 is closed. If it is open, right-click the Task bar, and then run Task Manager. Select co.porsche.piwis.shell and End Task.

Click Start (WinKey) and type services. msc in the search box. Run services.msc. If the service is running, then stop it.

If the Keygen is on the laptop, run it, and then leave it open.

Run a Command Prompt.
At the Command Prompt, type:
WMIC BIOS GET SERIAL NUMBER

Enter the Serial Number into the Keygen.
Enter the Country into the Keygen.
Then change the Expiry Date to 01/01/2030.
The Dealer number is not important, but you can enter one if you know it (7 digit number).
Then just leave the Challenge Key blank for now.

Click Start (WinKey) and type services.msc in the search box. Run services.msc
Then change the AdminService startup to Automatic, and click Apply.
Click Start to start the service.

Run Piwis3.
Go to the Imprint section.
Then enter 4 random digits into the Licence key boxes.
Tick the Accept box, and click License Update?—?it will say Not Valid?—?click OK.
Click Licence update twice more and OK.
The Request Key should have disappeared, and the Create Key button should be active?—?click it then.
Place the mouse pointer at the bottom of the screen, and open the Keygen.
And then enter the Request Key into the Challenge Key box, and click Generate.
Enter the license key shown into the boxes on Piwis. Tick the Accept box and then click Licence update.
If successful, you should get a message to reboot. Click OK, and then the computer will shut down.

IMPORTANT!!

After starting the computer, open services.msc again.
Stop AdminService and then set startup to Disabled. You can now run Piwis directly.

You can also get the serial number by printing out the imprint request.
The snag with that is if you are imprinting a VM, it does not show the complete number.

(Credits to 911Turbo for his great contribution)

This is for your information.

If you don’t have a working PIWIS 3 program or the keygen is not working for you,

you’d better choose decent Piwis 3 software, tested version better.

The circuit diagram in version 37.900 Porsche Piwis 3 software。works perfectly even without online access. And whether the updates work now or not is only secondary, the main thing we have to play.

How to install Porsche PIWIS 3 on VAS6154 head

Look here: How to use VAS6154 head with Porsche Piwis 3

project PIWIS3 PT3G => VAS6154-Kolun a
look at below link when you take your right to use
1 have to have installed piwis 3 laptop.
2. install piwis 3 driver
3 put together vas6154 install the drivers for vas6154-piwis // attempt to update interface Flesch
, if you see 6154 as pt3g then it is ok if nevidi next step =>
4 separated you from laptop
5. Copy the deteskop and install VAS 6154 driver 3.0.2.807 // installation after installation tend to deteskopa the trash
6 interface connects you 6154
7 program you run driver
8 interface you see 6154
9 select USB. Save.
10 restart.
11 tart driver program tach app (the first option above left) choose passthru> pt3g-3 piwis install seeks interface.
12 restart
13 Interface joints run driver VAS6154 seen as a passthru pt3g update memory device, check the USB version pt3g dal see you ok almost 6154

Note: please be careful and do it on your own risk.
obdii365.com will not give support

Contributor: ibi1961

Update: Unless you find the 08 firmware
The picture below is VAS 6154

vas6154-porsche-piwis-1 vas6154-porsche-piwis-2

VERY IMPORTANT:

For sake of security, you’re advised to use odis with VAS6154 and use piwis with porsche tester 3

with relief!

Porsche PIWIS Tester III is the new third generation Porsche diagnostic tool

Porsche PIWIS Tester III is the new third generation Porsche diagnostic tool, it’s update to modern user interface, more faster performance, also have: license automatic update, online view of the technical documents, fault finding guide, online programming, faster and more efficient work.

Allscanner VXDIAG Porsche Piwis III with Lenovo T440P Laptop  Porsche Piwis tester III V37.250.020

Piwis III-1

VXDIAG Porsche Piwis III Functions & Features:

1.New operation system and more intuitive diagnostic interface
2.New VCI for post-2018 vehicles with DoIP diagnosis
3.Good at maintenance, repair, control units change and programming & setting codes
4.To login for online immobilizer programming
5.To find out leading faults
6.To look for maintenance wiring diagram
7.To support special functions like modification or flashing, with Engineering mode (Development version)

Software version is 37.250.015,Developer mode enabled, PIWIS Tester III vehicle coverage up to 2018: 911, Macan, Cayeme, Panamera, Boxter Cayman

4-1

4-2

4-3

4-4

4-5