Tips & Warning: Chrysler Diagnostics & Programming by MicroPod 2

Look here: what you should know if you have a MicroPod 2 for Chrysler diagnostics and programming?

wiTECH installation tips:

1.Install AdobeAIRInstaller.exe
2. Install jre-6u45-windows-i586.exe
3. Install wiTECH_Install_17.04.27.exe
4. Restart the computer


1.The computer on the day of the date.
2. The computer must be connected to the Internet.
3.Connect the interface with laptop via USB Cable (Automatically install the USB Driver), open the software.



4.Tip registration, Turn off the software and turn it on Repeat several times , then you can use it normally .

​5.If the software shows ” Security Alert ” like the follow picture, please click “x” to close it .


6.On the following interface, please choose ” work offline”

Tips-Warning-Chrysler-Diagnostics-Programming-by-MicroPod-2-4 Tips-Warning-Chrysler-Diagnostics-Programming-by-MicroPod-2-5
Good to know: wiTECH software confirmed to work without any issue on Windows 7 32bit with Micropod 2

Installation Guide