Newest 2023 V1.2 and 2022 V3 Software Operation system support: Windows 8 and 8.1 Pro (both 32 and 64-bit versions)
Windows 10 and 11 (both 32 and 64-bit versions)
Language: English & Spanish
JPRO Heavy Duty Dignostic Tool Includes:
1.Software on DVD-ROM with Keygen and Drivers
2.JPRO DLA+ 2.0 Adapter Cable
3.Heavy-Duty Vehicle Cables Type 2 Vehicle Cables (6-Pin & 9-Pin)
4.Medium-Duty Type-B OBDII Cables (Ford, GM, Sprinter/Hino/Isuzu, Mack & Volvo)
6.Adapter Carrying Case
Noregon DLA 2.0 Adapter Error Codes
704 An invalid buffer parameter was used.
705 The packetization flag should be 1 or 0.
706 Blocking while using window handle notifications is not allowed.
707 One or more of theFilters have an invalid length.
708 The data length for this protocol has been exceeded.
709 The Command buffer is too small.
710 The CAN Bit Timingvalues are invalid.
711 This command is not supported with the current protocol.
712 The J1939 address is no longer valid.
713 Multiple J1939 clients must use same packetizing methods.
714 Device detected but not responding to commands.
716 Anexisting client is connected to the FLASH protocol.
718 The command failed. The command required to device to be in ‘Boot Mode’.
719 Failed to set device to “Boot Mode’.
720 Failed to set device the starting firmwareaddress.
721 Failed to set the end firmware address.
722 Failed to send ROM data to the device.
723 Failed to manifest device for firmware update.
724 Failed to obtain the device status.
725 The USB interface is in use. Wireless connections is notallowed at this time.
726 The Wireless interface is in use. USB connections is not allowed at the time.
727 Failed to get the protocol connection speed.
728 A DLA+Wireless adapter is not configured for connection.
729 An existing client is connectedto the WIRELESS_CONFIG protocol.
732 Failed to get the protocol connection speed.
733 Incorrect or invalid firmware version for your DLA+ family adapter.
734 Failed to load theregistry values for your DLA+ family adapter.
735 Failed to load the firmware update files for your DLA+ family adapter.
736 Failed to update the firmware version of your DLA+ family adapter.
737 Failed to read the firmware version of your DLA+ familyadapter.
738 Failed to obtain the device status during firmware update connect.
739 Failed to obtain the device status during firmware perform update.