How to connect JLR DoIP VCI via USB ?

To setup USB connection, you need to download Bosch driver for JLR DoiP VCI first:

https://mega.nz/#!aqwnhbQS!KS7QhERmZ4cCcZfvT2iXkdYN6ynz9vDQ3DmPQRGm0TU

Open Bosch_Driver folder
How to connect JLR DoIP VCI via USB 1 (2)

Open MTS6533_Setup

How to connect JLR DoIP VCI via USB 2 (2)
Install Bosch VCI Software (JLR)
Press Next
Press Next
Press Install
Finish installing Bosch VCI software

How to connect JLR DoIP VCI via USB 3 (2)
USB Configuration in progress. Don’t disconnect JLR VCI from PC until a message indicates that the configuration process has completed.
How to connect JLR DoIP VCI via USB 4 (2)

Open Device Manager to check the Bosch JLR DoIP VCI adapter is well connected

How to connect JLR DoIP VCI via USB 5 (2)

Open VCI Manager on desktop to make sure the Manager detect JLR VCI which indicates interface is well connected

How to connect JLR DoIP VCI via USB 6 (2)

Right click JLR SDD software on desktop->Find File location C:/Program Files/JLR/SDD/Runtime

How to connect JLR DoIP VCI via USB 7 (2)

Open the GatewayManager with Notepad
Find “Device5 = JLR-DOIP” and change value to “,  Device5 = JLR-DOIP”
How to connect JLR DoIP VCI via USB 8 (2)
How to connect JLR DoIP VCI via USB 9 (2)

Open the GatewayManager with Notepad
Find “Device5 = JLR-DOIP” and change value to “ Device5 = JLR-DOIP”

How to connect JLR DoIP VCI via USB 10 (2)
Setup completed.

Now you can run JLR SDD and Pathfinder software

How to connect JLR DoIP VCI via USB 11 (2)