How to program key fob for Dodge Challenger 2011 by XTOOL X100 PAD?

Here is a guide to show you: How to program key fob for Dodge Challenger 2011 using XTool X100 PAD? Steps are easy as below:

First, connect XTOOL X100 PAD Car Key Programmer with Dodge Challenger via the Bluetooth VCI Box plugging into car OBD port.

box-connect-with-car-1

Next, turn on car ignition, power on XTOOL X100 PAD and open main menu.

Go to “Immobilization”, find “Dodge” then select “Dodge 08-12”.

box-connect-with-car-2

Choose “Read security code” to calculate the pin code firstly.
box-connect-with-car-3

Soon you get the Dodge Challenger pin code “1069” as below:

box-connect-with-car-4
Then, back to choose “Program new key”.

box-connect-with-car-5
Follow the instructions: turn off car ignition, insert the new key you want to program then turn ignition on.

And you need to enter the pin code “1069”.

box-connect-with-car-6

It starts to program the new key, be patient to wait the process complete.

When you see the message “Program success”, it means XTOOL X-100 Pad Key Programmer successfully make a new key fob for Dodge Challenger!

box-connect-with-car-7