mitsubishi mut 3 reprogramming pc software

Search Method Selection

Select Special Function

mitsubishi-mut-3-reprogramming-pc-software-1

Select ECU Reprogramming

mitsubishi-mut-3-reprogramming-pc-software-2

Select an appropriate button:
mitsubishi-mut-3-reprogramming-pc-software-3
– Automatic Reprogramming (K-line): – Automatically searches appropriate Reprogramming data stored in PC.

– Database File Display (K-line): Shows the list of Reprogramming data stored in PC.

– Reprogramming Data Selection: Allows to select Reprogramming data in arbitrary drive and directories.

– Search: Allows to search the target data by ECU No., ROM-ID, etc.

– Automatic Reprogramming (CAN) : Automatically searches appropriate Reprogramming data stored in PC.

– Database File Display (CAN): Shows the list of Reprogramming data stored in PC.

– Memory card transfer: Transfer of stored Reprogramming data to Memory card.

Connect PC and V.C.I., and prepare following steps.

Connect Mitsubishi MUT-3 Main Harness B or A to V.C.I. securely.
After verifying the ignition switch position at LOCK (OFF), connect the M.U.T.-III Main harness B or A to the vehicle’s data-link-connector.

Turn Ignition switch on, and turn V.C.I. main switch on. (Do not start engine)

Data Search & Transfer (PC –> V.C.I.)

(a). Automatic Data Search

(b). Database File display

(c). Reprogramming Data Selection

(d). Search

(a). Automatic Data Search

Mitsubishi mut-3 Automatic reprogramming by K-LINE

Verify the connection of V.C.I. and harness

Applicable reprogramming data is searched from database installed in PC automatically

mitsubishi-mut-3-reprogramming-pc-software-4
Result of the search appears.

Start transferring the data into V.C.I. memory.

After completing the data transfer, ECU reprogramming will start sequentially

mitsubishi-mut-3-reprogramming-pc-software-5

(b)Database File display

Press Database File Display (K-line)

-Reprogramming data files in the hard disk are listed.

-Select an appropriate data file

-After completing the data transfer, ECU reprogramming will start sequentially

mitsubishi-mut-3-reprogramming-pc-software-6

(c)Reprogramming Data Selection

To select the reprogramming data from arbitrary directories

Press Reprogramming Data Selection

mitsubishi-mut-3-reprogramming-pc-software-7

Note:

-The displayed data as default is in the folder shown below.

C:¥Program Files¥MUT3¥RPGDATA

This directory is the default reprogramming data pool of M.U.T.-III.

-After completing the data transfer, ECU reprogramming will

start sequentially.

Data selection

Select a drive on the left chart, and the directories in the drive are displayed on the right chart.

mitsubishi-mut-3-reprogramming-pc-software-7

(d)Search

To search the reprogramming data by inputting ECU Part No., ROM-ID, or Data No.

mitsubishi-mut-3-reprogramming-pc-software-8

Note:

To input, 2 ways can be taken.

-By PC keyboard

-By virtual keyboard

Some info need to be a combination with the other info for

data search

– Current ECU P/N & ROM-ID need to be together.

– Data No. needs no other info.

Results

Select appropriate data
mitsubishi-mut-3-reprogramming-pc-software-10

Reprogramming ECU (V.C.I. –> vehicle ECU)

mitsubishi-mut-3-reprogramming-pc-software-11

Mitsubishi mut-3 Reprogramming by CAN Communication

Special function – ECU reprogramming – function options

mitsubishi-mut-3-reprogramming-pc-software-13 mitsubishi-mut-3-reprogramming-pc-software-14

Automatic Reprogramming (K-line)

Database File Display (K-line)

Reprogramming Data Selection

Search

Automatic Reprogramming (CAN)

Database File Display (CAN)

Memory card transfer

in detail..

(a)Automatic Reprogramming

Press Automatic Reprogramming (CAN)

Vehicle choice

-Selected Model year and Model Code of the vehicle are indicated.

-Select a system (ECU) and loading option

Check all equipment properly

mitsubishi-mut-3-reprogramming-pc-software-15

Data search

Searching the target reprogramming data

mitsubishi-mut-3-reprogramming-pc-software-16

Data check

-The appropriate reprogramming data is indicated

Reprogramming data check

mitsubishi-mut-3-reprogramming-pc-software-17

Reprogramming on board ECU starts.

mitsubishi-mut-3-reprogramming-pc-software-18

Reprogramming completed

-Reprogramming is completed properly.

-Reprogrammed ECU Part No. and S/W Part No. are indicated.

mitsubishi-mut-3-reprogramming-pc-software-19

(b)Database File display

Press Database File Display (CAN)

NOTE:

Can’t possible update at select data from data list.

mitsubishi-mut-3-reprogramming-pc-software-20