How to use Chrysler wiTech MicroPod 2 ?

Notice : wiTECH Micropod 2 Chrysler diagnostic tool with V17.04.27 wiTECH software can work online and support Chrysler online programming ( But you should have an account ) Here will share on how to use Chrysler wiTech MicroPod2,and check the procedures… Continue Reading

How to do wiTech Micropod2 Clone Failed to Register Mopar?

How to do wiTech Micropod2 Clone Failed to Register Mopar? Problem: I want to register witech micropod2 diagnostic scanner on Mopar.com. It won’t accept the serial number and reported an error ‘unable to register device’. Any solution? Solution: Chrysler tech… Continue Reading

How to solve the failure of wiTech Micropod2 to register Mopar?

Problem: I want to register witech micropod2 diagnostic scanner on Mopar.com. It won’t accept the serial number and reported an error ‘unable to register device’. Any solution? Solution: Chrysler tech authority for subscriptions use to work fine with clone micro-pod2… Continue Reading

Chrysler Diagnostic Tool wiTech MicroPod 2

Chrysler Diagnostic Tool wiTech MicroPod 2 V17.04.17 With DELL D630 or Lenovo T420 Laptop Ready To Use Update Online  The software have installed on DELL D630 or Lenovo T420 Laptop ,You can use it directly after you receive it. Notice : wiTECH Micropod 2… Continue Reading

Free download witech 2 v17.04.27 for micropod 2 Chrysler diagnostic tool

Tested more stable than witech 2 v17.04.27 Compatible with HQ China witech micropd 2 and original one windows 7 32bit or 64bit Diagnosis: Confirmed Programming online/offline: Confirmed Multi-languages: English, French, Spanish, German, Italian, Russian, Japanese, Korean and Chinese Workable cars:… Continue Reading

Solved! wiTECH 2.0 cannot Communicate with Any Module (All Modules are Red)

Here are some solutions of wiTECH MicroPod 2 communication failure with all modules. Theory of operation: Below are few different ways communication on a vehicle takes place: Scan tool to the Central Gateway Module (Ex: SGW, TIPM, BCM, etc.) Module to… Continue Reading

Possible to use AppCar FCA software with Mircropod 2?

Topic: Can you use AppCar FCA software with Mircropod 2? What is Appcar DiagFCA: Appcar DiagFCA is a professional diagnostics & programming software for Chrysler, Dodge, Jeep and RAM vehicles The Appcar DiagFCA software allows you: Read and erase all… Continue Reading

Tips & Warning: Chrysler Diagnostics & Programming by MicroPod 2

Look here: what you should know if you have a MicroPod 2 for Chrysler diagnostics and programming? wiTECH installation tips: 1.Install AdobeAIRInstaller.exe 2. Install jre-6u45-windows-i586.exe 3. Install wiTECH_Install_17.04.27.exe 4. Restart the computer Warning: 1.The computer on the day of the date.… Continue Reading

How to configure microPod using Wireless Configuration Utility

1.Connect a PC or Laptop that has the wiTECH MicroPod 2 installed to the wiTECH Access Gateway in ports 3 or 4 (preferred) you may also connect to the wiTECH wireless. * Note: If PC or Laptop is not on the… Continue Reading

Converting a microPod from wiTECH 2.0 to wiTECH 1.0

DESCRIPTION Note: The wiTECH MicroPod 2 Application has been deployed to only FCA-franchised dealers in the US and Canada. As of April 28, 2016, due to new registration requirements, a microPod device will no longer be compatible with wiTECH 1.0 after… Continue Reading