How to do wiTech Micropod2 Clone Failed to Register Mopar?

How to do wiTech Micropod2 Clone Failed to Register Mopar?


I want to register witech micropod2 diagnostic scanner on It won’t accept the serial number and reported an error ‘unable to register device’.

Any solution?


Chrysler tech authority for subscriptions use to work fine with clone micro-pod2 for programming with witech1 17.04 . Now Chrysler has changed from the normal site to now that wants any obd tool registered and warning wiTECH 2.0 requires Mopar’s 2017 secure microPod II (WSP-31560 or above). The device you attempted to register to your account does not meet this criteria.

Ever since witech/tech authority moved to MoparTSP, micropod clones don’t work for ECU programming. This is down to all clones sharing the same serial number meaning you cannot get around the device registration. The process to register and configure the software is difficult if you are not in USA.

There is a limited range of approved devices, any other legit J2534 devices might work, might not.

With cda6 offline its one option to do ecu programming.

How to use Chrysler wiTech MicroPod 2 Diagnostic Programming Tool ?

1.Connect the hard disk with your laptop , start your laptop ( Please dont connect the network )

2.If cant find the hard disk , or with blue screen , please enter into the BIOS system , make a select for SATA MODE to AHCI , then restart your laptop again .

3.Please set up the date of your laptop to 2017.01.01 !!!

4.Connect Chrysler wiTech MicroPod 2 USB Port with PC, OBD2 Port connect with car. The computer will automatically install Chrysler wiTech MicroPod 2 hardware driver

5.After Drive installed, you can find your device in your computer device manager

6.Double click the icon of Chrysler wiTech MicroPod 2

7.You will see  Chrysler wiTech MicroPod 2 connected with software, Please click ” next”

8. please select “word off line”,Then click “finish” and go to next step

9. Select ” Connect”

10. To this step, you can choose the type of car which you want to test the system

Any other request , welcome to contact or email to