The internal programming of the MaxiSys Diagnostic System, known as the firmware, can be updated using the Update application. Firmware updates increase the MaxiSys applications’ capabilities, typically by adding new tests, new models, or enhanced applications to the database.
To update the firmware
1.Power up the Autel MS908 PRO tablet and ensure that it is connected to a power source and with steady internet connection
2.Tap the Update application button from the MaxiSys Job Menu; or tap the update notification message when received one. The Update application screen displays.
3.Check all available updates:
If you decide to update all the items, tap the Update All button
If you want to update some individual items, tap the Update button on the right column of the specific item.
4.Tap the Pause button to suspend the updating process. When you tape Continue to renew the update, the updating process will resume from the break point.
5.When the updating process is completed, the firmware will be installed automatically. The new version will replace the original version if thee is one.
As for Honda Accord 2000 ABS not work, finally I noticed that Honda Accord 2000 ABS is through separate 5pin connector only not through Auto Diagnostic tool when I looked the wiring diagram. despite that it was not possible to read out codes from the ABS, not even with jump wire. Assuming that the control unit is faulty I start to measure connections and wheel sensors and found one of them broken. My son replaced it and that fixed the fault.
The strange thing is that it was not possible to read out codes with the jump wire…
I assuming to receive 5 pin adapter cable next week… will be back with the result.Another problem is I tried software on android tablet, not very good experience. First problem was while I tried to connect ICarScan VCI and got message that Firmware needs to be update but there were no way to do it. I got the update done via phone. After update it works somehow but very often it fails while trying connect to car or while it tries snoop the system of the car.