Want to know how to use Xhorse VVDI Key Tool MAX + Autel MaxiIM IM508 to program Mazda BT50 ID83 2012-2016 with all keys lost. Let’s look at how easy the job was.
Generate remote via VVDI Key Tool
Generate Transponder >> ID70 ~ ID83(80bit) >> 83-Ford(80bit) >> 83-Ford(80bit) >> Generate
Learn the key via Autel IM508
IMMO >> Mazda >> Auto select >> Read >> OK >> Yes >> Immo status scan >> DTC quick clear >> All keys lost (driven) >> Start
1. All keys will be deleted.
2. At least 2 keys are required to complete key learning.
Turn on the ignition.
Learned keys: 2
The current number of keys is 0.
Note: All keys have been deleted.
At least 2 keys are required to complete key learning.
To start the engine the following steps must be completed:
1. Switch off the ignition.
2. Turn on the ignition with the first key, 3 seconds later turn it off and remove the key.
3. Switch on the ignition with the next key, switch it off after 3 seconds and remove the key.
Contact us if you need Autel IM508,our website firstname.lastname@example.org.