This is a test report from CnAutotool.com. How-to: bypass pin code and program a new smart key on a 2018 Jeep Compass from the U.S.
Two proximity keys to Compass:
Jeep USA-CANADA in OBDSTAR key master dp:
It’s 2018 Jeep Compass USA
Immobilizer – Compass (2017-2018)- proximity
VERY IMPORTANT: pls confirm your internet connection is good, coz server connection is required for the functions below
Step 1: Read pin code
Step 2: Read key number
Step 3: Erase a key
Step 4: Program a new key
in detail…
Step 1: Read pin code
X300 DP PLUS is gonna to read PIn codes
Confirmed that your network connection is good
Switch ignition off and press the emergency flasher switch
Read Pin success
…
Step 2: Read key number
Obdstar key master dp will read keys
2 keys available
Step 3: Erase a key
X300 DP PLUS will erase a key
Make sure that your network connection is good
Switch ignition off and press the emergency flasher switch
Make sure there are no wireless devices close to the prox key
Make sure all doors are closed
The procedure will disable all prox and then program one prox
Obdstar fill in pin automatically
Just press enter to continue
Put the smart key to be added in the central control position
press and release the unlock key once within 30 seconds (3 times)
Now, only 1 key available
Finish
Step 4: Program a new key
Obdstar X300 DP PLUS will program a smart key
Make sure:
– your network connection is good
– Switch ignition off and press the emergency flasher switch
– Make sure there are no wireless devices close to the prox key
– Make sure all doors are closed
The procedure will add a new key without erasing the ones previously programmed
Enter pin
Pls add to the smart key in the central position
30 seconds
press the unlock button repeatedly until the door lock moves
2 keys now!
Finished!
Test the new key
Worked!
