XTOOL X100 PAD2 Program Proximity/Fobik for Dodge Dart 2013

This article show test on how to use Xtool X100 Pad2 to program new keys for Dodge Dart 2013.

XTOOL - X100 - PAD2 - Program - 1

Procedures:

Connect XTOOL X100 PAD2 programmer to Dodge Dart

Enter the menu to select IMMO function

Select “Chrysler/Jeep/Dodge”

Select “Proximity/Fobik”

XTOOL - X100 - PAD2 - Program - 2

Dodge

XTOOL - X100 - PAD2 - Program - 3

Dart 13

XTOOL - X100 - PAD2 - Program - 4
It will prompt you to turn Hazards On or turn Ignition off

XTOOL - X100 - PAD2 - Program - 5

Program Keys

XTOOL - X100 - PAD2 - Program - 6

Place a new Fobik into the ignition.

Ignition switch must be in the “Lock” or “Off” postion

Press “OK” to continue

XTOOL - X100 - PAD2 - Program - 7

Please enter security code,after entering security press “OK” to continue

XTOOL - X100 - PAD2 - Program - 8

Programming success.

XTOOL - X100 - PAD2 - Program - 9

Now test the new key on your Dodge Dart 2013.

OBDSTAR, Xtool and Autel which to Program Ford EcoSport Smart Key?

What for Ford EcoSport smart key programming?
Autel, OBDSTAR, XTOOL– which can make it?
Here are the tests:
Autel IM100: Failed!
Obdstar X300 Pro3: Success!
Obdstar X100 Pro: Success!
XTOOL X100 PAD2: Success!
Test 1: Autel Im100 failed to program Ford EcoSport smart key
obdstar-x100-pro-ford-ecosport-1 obdstar-x100-pro-ford-ecosport-2
Security access failed!
It’s 2014 Ford EcoSport
On a side note, IM100 now is Autel MaxiIM IM508
Test 2: OBDSTAR X300 PRO3 can make a Ford EcoSport smart key
obdstar-x100-pro-ford-ecosport-3
Get solution with x300.
Raoul Engoule Raoul tested it! It’s 2014 Ford EcoSport
Test 3: Obdstar X100 Pro has no problem with Ford EcoSport smart key program
obdstar-x100-pro-ford-ecosport-4 obdstar-x100-pro-ford-ecosport-5 obdstar-x100-pro-ford-ecosport-6 obdstar-x100-pro-ford-ecosport-7 obdstar-x100-pro-ford-ecosport-9 obdstar-x100-pro-ford-ecosport-10

obdstar-x100-pro-ford-ecosport-11 obdstar-x100-pro-ford-ecosport-13 obdstar-x100-pro-ford-ecosport-14

obdstar-x100-pro-ford-ecosport-17

obdstar-x100-pro-ford-ecosport-18
Done! It’s Ford EcoSport all keys lost
Note: you should have a pin code calculator like FMPC001 Ford incode calculator or VPC-100 for security codes.
X100 pro cannot get the code itself.
Test 4: Xtool X100 Pad2 can read security codes & add smart EcoSport keys
obdstar-x100-pro-ford-ecosport-19
obdstar-x100-pro-ford-ecosport-20
obdstar-x100-pro-ford-ecosport-21
obdstar-x100-pro-ford-ecosport-24

obdstar-x100-pro-ford-ecosport-26obdstar-x100-pro-ford-ecosport-27

obdstar-x100-pro-ford-ecosport-31obdstar-x100-pro-ford-ecosport-32
Success! X100 Pad2 can read security codes and add smart keys…all done on its own!
Conclusion:
For Ford EcoSport smart key program, you’d better have an Obdstar key master X300 pro3 or Xtool pad2.
Both can read PIN and program a smart key.
With Obdstar X100 Pro, you must have another tool for security codes read. Besides, it stopped production.
With Autel IM100 (IM508), you need luck! it’s good for auto diagnostic tests and key programming to some cars.

Can I Add Another Software to Xtool X100 Pad2?

Question: Has anyone added another software to the  Xtool x100 pad2 auto key programmer?

Answer:

Some Xtool Pad2 users has tested and confirmed working.

Tested:

Keydiy mobile KD works

Instacode works too

VVDI Key Tool app

Disclaimer: We are not responsible for the damage. You are at your risk.

Example:

Mobile KD app & Keydiy Mini KD cable on Xtool PAD2 tablet

search on google play store “Mobile KD apk” and download it

xtool-x100-pad2-keydiy-app-1 xtool-x100-pad2-keydiy-app-2 xtool-x100-pad2-keydiy-app-3 xtool-x100-pad2-keydiy-app-4 xtool-x100-pad2-keydiy-app-5

How to program vag 4th 5th IMMO by Xtool X100 PAD 2 full set

XTOOL X100 PAD2 full set working with Xtool KC100 adapter is verified to program key for VAG 4th 5th IMMO. BTY, X100 PAD 2 standard set is optional to choose vag 4th 5th IMMO programming function.
Matched Dashboard Type for 4th ,5th immobilizer of VW/Audi/Seat/Skoda: CDC24C32,NEC24C32,9S12,NEC24C64,NEC24C64 color screen, Jiangsen, NEC95320, NEC24C64 white screen.

Testing Xtool X100 PAD 2 full set and Xtool KC100:

88-1 8-2 8-3 8-4

Here full package XTOOL X100 PAD2 Full set and Xtool KC100 adapter:

8-5

Here XTOOL Scan Tool X100 PAD2 Full Set special Adapter for 4th 5th immo

8-6

Key programming for 4th,5th immobilizer of VW/Audi/Seat/Skoda:

8-7
8-8
8-9
8-10

Audi A6L 2013 5th immo add key using Xtool x100 pad2 with KC100 adapter

Have Audi A6L 2013 with 5th immo to add new keys, highly recommend Xtool x100 pad2 with KC100 adapter. Seeing is believing, read the step-by-step procedure in the following paragraphs.

3-1

The first one key is original and the remote is working, the second one is blank to be programmed.

3-2

I complete a Youtube video, attach here:

Read me:

www.cnautotool.com marked in this video is the official site of Xtool x100 pad2.

CnAutotool is a trustworthy shop I bought and will buy Xtool x100 pad2

If you have trouble to watch the video, please go on reading the step-by-step procedure as below:

Tap “X100 pad2” on the screen.

Tap “VW/Audi Skoda / Seat”

3-3

Tap “4th/5th immobilizer system”.

3-4

You will have 2 options “4th immobilizer system” and “5th immobilizer system”, Audi A6L 2013 is 5th immobilizer system.

3-5

pad2 can’t identify the VIN code because the ignition doesn’t turn on, go to switch the ignition on.

3-6

Come to 5th immobilizer system function menu.

3-7

1). Read immokey.

3-8

3-9
3-10

2). Show security data

Have 3 keys.

3-11

3) Make dealer key.

Please plug the KC100 into tablet, press (OK) to continue.

The KC100 adapter indicator turn blue means it powers on.

3-12

3-13

3-14

Put the original key into the coil of KC100 adapter.

3-15

Then put the blank key that ready to add to the coil of KC100 adapter

3-16

Writting key…

Create dealer key success.

3-17

4) Learn the key.

Turn the ignition on, click “OK”.

Read the note shown as below.

3-18

Input the number of keys to match

3-19

Put the blank key to the sensor area.

3-20

The first one learn successfully.

3-21

Then put the second one to learn, after learn with success, it prompts “Learning success”

3-22

Finish match the key.

3-23

Tap “Return” button to exit the system.

To identify the two keys are working or not.

They are working fine.

3-24

Now I take one key outside of the car and leave one key in the car.

Start the engine. the first key can turn on.

3-25

Take the first one outside of the car, and another one in the car, start the engine, the key start turn on ok.

The remote is working.

Done!

The truth:  Auto Scanner Tool Xtool x100 pad2 with KC100 adapter is tested able to add new keys for Audi A6L 2013 with 5th immo.

Examples of Diagnostic Link Connector Locations of Xtool X100 Pad2

  1. This manual is designed for the usage of X100 PAD2, applying to X100 PAD2 smart automotive diagnosis platform.

No part of this manual can be reproduced, stored in a retrieval system or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), without the prior written permission of Xtool.

  1. Use the device only as described in this manual. The user will be responsible solely for the after-effects of violating the laws and regulations caused by using the product or its data information; in this case Xtool will not bear any legal responsibility.
  2. Xtool shall not be liable for any incidental or consequential damages or for any economic consequential damages arising from the accidents of individual users and the third parties, misuse or abuse of the device, unauthorized change or repair of the device, or the failure made by the user not to use the product according to the manual.
  3. All information, specifications and illustrations in this manual are based on the latest configurations and functions available at the time of printing. Xtool reserves the right to make changes at any time without notice.

Examples of Diagnostic Link Connector Locations of Xtool X100 Pad2

1. Diagnostic Link Connectors Locations of Various Vehicle Models

13-1

*AUDI A6: the OBD plug is on the lower left side of the dashboard, use SMART OBDII-16 connector.

13-2

*VW Bollywood 1.8: the OBD plug is below the console, use SMART OBDII-16 connector.

13-3

*Benz S320,220 Chassis: the OBD plug is below the dashboard, use SMART OBDII-16 connector.

13-4

*Benz C180: the OBD plug is on the left hand side of the engine bay, use Benz-38 connector.

13-5

*Benz 300SEL 140 chassis: the OBD2 Scanner is on the left hand side of the engine bay, use Benz-38 connector.

13-6

*GM Buick: the OBD plug is below the dashboard, use SMART OBDII-16 connector.

13-7

*GM Buick GL8 : the OBD plug is below the dashboard, use SMART OBDII-16 connector.

13-8

*VW POLO: the OBD plug is below the dashboard, use SMART OBDII-16 connector.

13-9

*BMW 735I: the Xtool Scanner is in the right hands side of the engine bay, use BMW-20 connector.

13-10

*VW Passat B5: the OBD plug is behind the gearlever and beside the parking brake lever. Lift the cover to access it. Use SMART OBDII-16 connector.

2. Location Diagram of Vehicle Diagnostic Link Connectors
Location diagram of pick-up truck diagnostic link connectors:

13-11

Location diagram of utility vehicles diagnostic link connectors:

13-12

Link diagram of small car diagnostic link connectors:

13-13

NOTE: Each vehicle manufacturer may use additional pins to diagnose a variety of systems. Not every manufacturer uses the same standard. The function on a certain pin will vary from manufacturer to manufacturer. Verify with the manufacturer.

3. Diagnostic Link Connectors Terminal Definition and Communication Protocols
3.1. Standard OBDII Diagnostic Link Connector:

13-14

Pin Definition (Reference material)
Various pin definitions as follows:
1. Manufacturer definition
2. SAE J1850 bus positive
3. Manufacturer definition
4. Bodywork site
5. Signal site
6. ISO 15765-4 defined CAN high
7. ISO9141 and ISO14230 defined K line
8. Manufacturer definition
9. Manufacturer definition
10. SAE J1850 bus negative
11. Manufacturer definition
12. Manufacturer definition
13. ISO 15765-4 defined  CAN low
14. ISO9141 and ISO14230 defined L line
15. Permanent positive voltage
[1] 1, 3, 8, 9, 11, 12 and 13 are defined by manufacturer.
[2] 2, 6, 7, 10, 14 and 15 are used for diagnostic communication. Unused definitions can be defined by manufacturers.