Caterpillar Electronic Technician (Cat ET) is diagnostic software required to communicate, diagnose and service electronically controlled Caterpillar engines and machines. When connected to an Electronic Control Module (ECM), a technician has the ability to diagnose existing and potential problems, configure the product, and obtain data for analysis.
Caterpillar ET Electronic Technician Diagnostic Software
Brand: Caterpillar
Region: WorldWide
Support All cars of CAT
Support car list of CAT Caterpillar ET Diagnostic Tool :
This program works Et Cat dealer diagnostic distributor of Caterpillar Communication Adapter
Caterpillar ET 2020A program provides comprehensive information and troubleshooting your CAT machinery.
Among its features it is that CAT Caterpillar ET has the ability to do analysis and testing of all sensors and real-time systems.
And also it allows you to view all error codes of Caterpillar machinery and has integration with Caterpillar sis in this way to see all technical information for how to fix the fault.
Cat ET allows.
. View active and logged diagnostics.
. View events where irregularities occurred and were recorded by the ECM.
. See the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
. Register and log performance data.
. Graph a group of status parameters.
. View the current configuration of an ECM.
. Change ECM configurations.
. Diagnostic testing.
. Calibrations.
. Print reports and diagnostic results.
What’s new
Update 2019A Trainer – Wheel Loader
988K XE wheel loader 988K XE has been added to the Trainer application.
Update Communications Adapter 3 (CA3)
The service tool contains a new version of software Adapter Communication 3 (CA3). The new software allows 500 kilobits flash compatible applications.
Changes in testing marine sea
In state function test marine sea, manual input parameters 9xx have been updated. Some numbers have been removed and some existing numbers have new descriptions. New numbers have been added with new number designations 900 for existing engines, including engines based on SCR aftertreatment level 4. The names and content of the configuration files steady state have changed and are based on the Engine cooling system. Feature sea trial now supports fixed speed marine engines.
Updates Product Status Report The Status Report
product has been updated to include certain features compatible with ECM history, as the history of subsequent regeneration treatment and service history test.
Update Winflash screen
display for Winflash function has been updated. A new Expand All button opens all sections of the screen to show all the details of the ECM detected by WinFlash. A new Collapse All button hides all the sections of the screen except the header rows that display the names of ECM detected.
Caterpillar ET Functions List:
1.View active and logged diagnostics.
2.View events where irregularities occurred and were logged by the ECM.
3.View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
4.Record and log performance data.
5.Graph a group of status parameters.
6.View the current configuration of an ECM.
7.Change ECM configurations.
8.Perform diagnostic tests.
9.Perform calibrations.
10.Print reports and diagnostic results.
11.Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application
Caterpillar ET Support Languages:
English,Chinese,Danish,French,German,Italian,Portuguese,Spanish
Caterpillar ET Support OS:
Window 7,Window 8,8.1,Window 10 32 bit and 64 bit
PC Requirements
Recommended Configurations
PC containing a 2.0 GHz dual-core processor·
3GB RAM·
3GB of available hard disk drive·
DVD-ROM drive·
15.4 inch XGA Screen (1280×1024 compatible)·
MicrosoftÒWindows™ 7 Professionalor Windows 8 Professional
(Note: Windows 8 RT is not supported)·
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)·
USB 1.1 or 2.0 port (for use with Comm Adapter 3)·
Ethernet RJ45 connector·
Built in pointing device or mouse·
For security purposes, MicrosoftÒInternet Explorerversion 9 or newer is recommended.
Note: The most recent version of MicrosoftÒInternet Explorer may not be validated to work with the service tool.
Minimum Configurations
PC containing a Pentium 2 GHz processor or greater·
1GB RAM·
500MB of available hard disk drive·
CD-ROM drive·
Super VGA monitor or display (1024×768)·
MicrosoftÒWindows™ 7 Professional or Windows 8 Professional
(Note: Windows 8 RT is not supported)·
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)·
USB 1.1 or 2.0 port (for use with Comm Adapter 3)·
Ethernet RJ45 connector·
Built in pointing device or mouse·
For security purposes, MicrosoftÒInternet Explorer version 9 or newer is recommended.
Note: The most recent version of MicrosoftÒInternet Explorer may not be validated to work with the service tool.
Features
Display, graph and log status parameters.
Retrieve prognostic data including histograms, engine totals for fuel used and miles traveled.
View active diagnostics and clear logged diagnostics. View events where irregularities have occurred and have been logged by the ECM.
Perform calibrations to enhance performance of the ECM.
Customize the ECM with application-specific settings.
Over 100 custom Diagnostic, Information and Service features including:
– 2D and 3D Histogram plotting capability (engine software
support required).
– Custom Status screen groups
– Snapshots (Download and display snapshot data recorded by the
ECM)
– Configuration Aid that allows upload/download of same
configuration to multiple control modules
Package :
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 9PIN Cable (from device to your truck)
5.6PIN Cable (for old truck)
6.14PIN Cable(for new truck)
7.Plastic box
