Yanhua Mini ACDP Refresh Mercedes-Benz DME/ISM No Soldering
The newest Yanhua Mini ACDP module 18 has been fully launched. It is specially designed by Yanhua Tech for refreshing Mercedes-Benz DME /ISM no need soldering, no risk!
This is Mini ACDP module 18 (PECU line).
Which Benz car models can work with?
Support Mercedes-Benz CR3.XX/CR4.XX/CR5/CR6/CR60.XX/CRD.11/CRD2.XX/ME 2.8/ME17.7/ME9.7/MED17.7.X/SIM266/SIM271DE2.0/SIM271KE2.0/SIM4LE/SIM4LKE/ etc.DME refresh
Support Mercedes-Benz ISM refresh
How to use?
1.Connection diagram
For Mercedes-Benz DME:
Connect ACDP, PECU line and DME as shown in the figure
Mercedes-Benz 271 DME connection diagram:
Mercedes-Benz 272 (ME9.7) DME connection diagram:
For Mercedes-Benz ISM:
Connect ACDP, PECU line and ISM as shown in the figure
2.Operate on Mini ACDP APP
Make sure the connection diagram is proper, and then go to run Mini ACDP APP.
Tap “Benz”-> “DME refresh” or “ISM refresh”-> select the corresponding DME model you desire
Click “Identify” to see if the DME is communicating
Then click “Refresh” to refresh the IMMO info
Note: Don’t cut the power or pull out the device during the operation.
If you want to modify VIN, select “modify VIN” option to operate directly.
