Autel MaxiIM IM608 Pro perfectly makes a car key without original key to Honda Accord 2020- .
No need Autel XP400 Pro!
Here is the tutorial:
Connect the cable to the JVCI and the other end of the cable to the vehicle’s OBDII port
Establish a Bluetooth connection to the JVCI on IM608 Pro tablet
Tap IMMO>> Accept the disclaimer>> Honda>> Manual selection>> Accord>> Smart key>> Push to start
Confirm the vehicle profile
Do a system scanning first to see if any issues appear.
Tap Immo status scan
Press Start button twice and check if the ignition turned on
The scan comes up normal
Select ‘All keys lost (guided)’
Press ‘Start’ to perform the function automatically.
Step 1: Function initializing
Step 2: Immo security verification
Step 3: All keys lost
Step 4: New key programming
Step 5: Key data synchronization
Registration condition:
There is no DTCs.
Here must be all keyless remotes which want to register. One keyless remote have to be in vehicle.
Note:
When registering, be sure the following to decrease the source of noise as much as possible while registering the keyless remote. Turn off switched such as a navigation system and audio. Separate the for diagnostic tool from the keyless remote as much as possible approximately (3 feet). Close all windows, sunroofs and doors.
Turn ignition switch off! Don’t press the foot brake and press the engine start/stop button
Take one original keyless access remote into the vehicle, and remove all other keyless access remotes from the vehicle
Press Start button twice, and check if the ignition is turned on
It’s yes.
This is a new mode newer than 2020, so press Yes to continue
Program key successfully
Once key learning is successful, synchronize the new key with the vehicle by turning the ignition on and off a few times.
Just follow the on-screen instruction to do
Check all keyless access remotes to ensure each will start the engine and lock/unlock the doors
Please turn the ignition switch on
Now have successfully added a key with all keys lost
Finally, test the new key programmed to see if it works by turning the engine on and locking/unlocking the doors.
Go back to immo learning and check how many keys we have now.
We can delete some keys add a key and check key info.
OK, that’s whole process to program new key to 2020- Honda Accord with Autel IM608 Pro and MaxiFlash JVCI J2534 ECU reprogrammer.
www.cnautotool.com
