How to setup USB Flasher connection with Porsche car?
1.PC-Network cable-USB Flasher-Car’s USB
(If your computer does not have a network cable interface, the connection method is: PC-USB conversion network cable interface-Network cable-USB Flasher-Car’s USB,)
2.PC-Network cable-USB Flasher-Car’s USB
（If your computer does not have a network cable interface, the connection method is: PC-USB conversion network cable interface-Network cable-USB Flasher-Car’s USB-TYPE C）
2.Set PC IP address
Set pc Ethernet IP address
IP address:172.16.250.250
subnet mast:255.255.0.0
If you connect the network cable and the tool can communicate, the LED indicator of the USB Flasher will glow and blink（Very important）
3.After the USB Flasher is connected to the Porsche car, check the PC and use the windows cmd command to ping 172.16.250.248. If the connection tool works well, you will receive a reply.
TIPS:
The USB Flasher connected to the Porsche car interface is different from the USB conversion network cable interface, because the USB Flasher’s firmware connected to the Porsche car interface is different, it is recommended that you find a professional person to buy it.
The Porsche PIWIS 3 (PST3) is the newest Diagnostic Tool in the market. It can read trouble code, clear trouble code, shows ECU information. It test live data, display actual values, and programs. On all; process malfunction navigation, showing all interior circuit diagram. Specially if were produced after 2005. The PIWIS III has original oscillometer and multi-meter Function. It is the absolutely necessarily tool for the job.
1.Piwis 3 With V40.400 and V38.300 Piwis III Software for Porsch Cars diagnostic & Programming.
2.Piwis 3 with developer mode software cover all piwis 2 functions.
3.With New DoIP Ethernet diagnostic technology,Supports Porsche Models after 1996.
hope it help
If you have any request , please check our website www.cnautotool.com , and you can make the order online directly , or you can send email to us sale@cnautotool.com
