Mercedes Benz C6 OEM Xentry diagnosis VCI DOIP Pass thur interfac is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5 . Today lets introduce some instructions about the software registration & firmware instructions
1.2019.12 Xentry and DAS do not need to be activated , can use directly.
2.Use one USB cable to connect benz OEM C6 and the computer to run DTS Monaco super engineering software (dts is activated with usb).
3.epc, wis software activation steps:
Login account: admin, password: 12345
Note: after opening epc-wis browsed, if you can see lan-id is unknown, the reason is the computer wasn’t installed with NIC driver or you need to uninstall and reinstall the NIC driver.
Driver installation:
1.Open VX Manager (open www.vxdiag.net, scroll down to download the newest version)
2.Click on “Diagnostic”, then “Benz” icon. If “Install” option light up， click on it; if it is gray, driver is installed successfully (Note: the computer needs to be connected the network, OEM C6 needs to be connected to the car and one computer).
For more request , please check our website directly
If you have any suggestions about Mercedes-Benz VCI C6, please leave us message or visit our website and
contact us: www.cnautotool.com
