Yanhua Mini ACDP adds a New Key to BMW CAS4 via OBD

Yanhua Mini ACDP free updated OBD read/write BMW CAS4/CAS4+ (2019-11-15). Support IMMO programming (add key & all keys lost) and mileage reset for all known versions via OBD.

Here’s the demo on adding a new CAS4 key using ACDP Mini via OBD in less than 3 minutes.

Requirement:

Yanhua ACDP mini host

BMW CAS Module 1 license

Original key and a new key

Procedure:

Yanhua Mini Acdp Bmw Cas4 Via Obd 1

Connect ACDP programmer with vehicle via OBD socket

Run ACDP APP on mobile phone and make sure ACDP has connected

Select BMW->CAS1-4-> CAS4/CAS4+ ->OBD Mode

Yanhua Mini Acdp Bmw Cas4 Via Obd 2
Select OBD mode IMMO/mileage ->Add key (automatic mode)

Yanhua Mini Acdp Bmw Cas4 Via Obd 3

Identify vehicle information and confirm

Yanhua Mini Acdp Bmw Cas4 Via Obd 4

Yanhua ACDP requires to pre-process ECU

Yanhua Mini Acdp Bmw Cas4 Via Obd 5

Press Continue

Yanhua Mini Acdp Bmw Cas4 Via Obd 6

Perform backup coding

Auto saved coding data.

Yanhua Mini Acdp Bmw Cas4 Via Obd 7

Pre-process ECU in progress until finished

Yanhua Mini Acdp Bmw Cas4 Via Obd 8

Put the working key close to the Start button antenna position

Yanhua Mini Acdp Bmw Cas4 Via Obd 9

Check and confirm VIN & ISN code

Yanhua Mini Acdp Bmw Cas4 Via Obd 10

Select a blank key position to add key

Yanhua Mini Acdp Bmw Cas4 Via Obd 11

Put a new key close to the Start button

Learning key in process

Yanhua Mini Acdp Bmw Cas4 Via Obd 12

Program new key success.

Yanhua Mini Acdp Bmw Cas4 Via Obd 13
Yanhua Mini ACDP will auto saved new key data.

Test the new key.

Done.