I bought a new SEC-E9 Key Cutting Machine off cnautotool.com recently. Here I’d like to share my experience with you.
Cost & Package:
SEC-E9 cost me 2,085 euro with free shipping via DHL within 5days.
The latest retail price is 2177 euro, but there is a promotion at eobdtool e-shop recently, not only get 4% discount, but also get additional offers: Buy 1 unit of SEC-E9, get 1 free FO21 Ford Tibbe clamp (valued 132 euro)
Packaged by a paper box incl. following items:
SEC-E9 key cutting machine/ Cutter/ Decoder/ T wrench/ M5 bolt/ Stopped/ Auxiliary clamp SX9 clamp/ Calibration block/ 24V Adapter/ Spindle belt/ User manual
I was so satisfied that all goods kept well when I received the package.
The test:
I used sec-e9 to cut HU66 key and 2018 VW/ Audi HU162T.
Now we go one by one.
Test 1: Cut HU66 key by using HU66 auxiliary clamp on SEC-E9
Procedures:
Go to SEC-E9 menu
Press “Search” button
Select “SILCA” to enter key data
Use the original key to open cylinder
Test OK
Use the stopper to help you fix the original key in the correct position
Press “Decode” button to start decoding original key and get the key number
Get the key number successfully
Put the key into the HU66 auxiliary fixture and tighten
Select “Cut”-> “1st Cut” to start cutting a new key
Note: Please remember to close the safe gate
It takes about 2 minutes to cutting the key
Cutting is done!
Open the safe gate to clean the clamp & the new key
Take out the new key
Fix the other side of the new key blank
Press “2nd cut” button to start cutting another side key
Cutting is complete
Test the new key, can work very well!
Test 2: Cut 2018 VW/ Audi HU162T keys by SEC-E9
Procedures:
Prepare the key and cylinder for new VW HU162T (9)
Press “Search” button in the main interface
Select “Key blank”-> Input “HU162T”
Press “Search”-> Select “SILCA-HU162 (9)
Come to the basic data page for HU162T
Firstly decode side A of original key
Fix the side A of original key on#1 car key clamp
Confirm it’s side A, and then press “Decode”
Decoding side A
Side A is decoded successfully
Press the key image to decode side B of the original key
Note: There is a small groove on side B
Fix side B on HU162T clamp, and tighten the screw
Install HU162T onto #1 car key clamp
Press “Decode” button to enter decoding page
Select the most right blue icon as sense key location and check “Round off”
Decoding side B
Complete decoding side B
Remove HU162T clamp and put a new key blank for copy
Select side A, and press “Cut” button to enter cutting page
Replace the right decoder with a 1.9mm cutter
Note: Remember use 1.9mm cutter to cut HU162T keys on #1 car key clamp
Cutting side A
Finish cutting side A
Clean the clamp and blank key
Fix the other side of the blank key
Select side B by press the key image
Press “Cut”
Remember to cut side B with 2.0mm cutter on #1 car key clamp
Install HU162T clamp to cut side B
Cutting side B is done
Clean the clamp and blank key
Remove HU162T clamp and prepare to cut side C on #1 car key clamp
Cutting side C is done
Use it to open the cylinder successfully!
That’s all. Hope can help you!
