Look here: How to program new smart keys to Ford Everest when all keys are lost, using Lonsdor K518ISE Key Programmer.
Main steps:
Step 1 Require at least 2 keys
Step 2 Ignition OFF and Open and close the door on the driver side
Step 3 Lonsdor k518ISE reads out vehicle info, current key number, PIN codes
Step 4 Put a new smart key into the slot (sensor area) and press the START button
Sensor area:
– Central armrest box
– Cup holder
Step 5 Lonsdor is programming the first new smat key, then put the second one into the slot and press START button
Step 6 Lonsdor continues to program the second. And recognize the programmed key number.
New keys programming completed.
In details…
Ford Everest smart key
Ford Everest OBD location
Select Immobilizer->Ford->Everest->Other Region or America
Go to program new keys when all keys are lost
You should have at least 2 smart keys
Ignition OFF and Open and close the door on the driver side
Car Key Programmer Lonsdor K518 read Parts number, VIN codes, Current key number
Reading PIN codes
Put a new smart key into the slot (sensor area) and press the START button
Sensor area:
– Central armrest box
– Cup holder
Key programming success
Test the new keys and verify both are working good
Job’s done!