Cummins has become the innovator and technology leader in data link adapters and service tools for diesel engines. The eye-catching Cummins INLINE 6 Data Link Adapter breaks new ground by utilizing the latest electronic technology to deliver high performance and high quality at an attractive price. If you ever use data link adapters to download new calibrations to ECMs, you really should be taking advantage of the high-speed communications capabilities inherent in the new Cummins INLINE 6 adapter. So why waste your time and money on more expensive, inferior products that are not fully-compatible with Cummins software? Check out the entire family of INLINE products by selecting from the Products menu above.
Each Cummins INLINE kit contains a data link adapter, basic cables, and the INLINE PC software driver. Load the software driver, connect all the hardware, and you are ready to start a new era in data link adapters.
Note that if you have an INLINE 6 Datalink Adapter, you must install the INLINE 6 PC Driver that is included in this software. The INLINE 6 Software installation is a typical Windows-based, self-executing installation. Version 6.4.1.0 of the executable setup file installs the latest INLINE 6 PC Driver, which allows RP1210-compatible software applications to communicate with the INLINE 6 adapter. The latest version of the reflash utility and version 6.41 of the firmware are also included in this download and will be installed automatically in their proper folders in your PC when you run the install program, as described below.
The Reflash Instructions about INLINE 6
Download the appropriate INLINE 6 zip file by clicking on a link above (note that unless you have a 64-bit Operating System, you should use the 32-bit file).
1.Unzip and extract the executable file using zip/unzip software.
2.Click on the Windows Start menu and click Run.
3.Click on the Browse button and locate the file you have downloaded.
4.Click the OK button to install the latest INLINE 6 Driver, reflash utility, and firmware on your PC.
5.Follow the onscreen instructions to complete the installation.
6.Connect +8 V to +50 V power to your INLINE 6 adapter through the DB25 cable you have.
7.Use your DB9F to DB9M serial cable or USB cable to connect the INLINE 6 adapter to the proper PC communication port.
8.Follow the Driver Installation and other instructions located on the On-line Manuals page.
