Can I use OBDSTAR X300 DP on BMW CAS2 CAS3 CAS4 via OBD?

Is it possible to add one key to BMW CAS2/CAS3/CAS4, using OBDSTAR X300DP PLUS yellow version?
obdstar-x300-dp-cas2-cas3-cas-1
On cas 2,3 we use tools like usually VVDI2, CGDI BMW.
On cas 3+ with working key!! If it is AKL (all keys lost), you need to pull ISN code on dde or dme!!!! for registry a key you need downgrade the cas, register key and after backup.
On cas 4 Obdstar x300 dp is not working on obd !!! Just to Block or activate key !!!!
OBDSTAR X300 DP Key Master DP BMW Car List:
obdstar-x300-dp-cas2-cas3-cas-2

Disable and Enable keys:
CAS3(CAN)
Enable keys
Disable keys
CAS4(CAN)
Read keys infomation
Keys ID
Keys status
Current ignition key NO.
Enable keys
Disable keys
K Line
Read version infomation
Read keys infomation
Keys ID
Keys status
Remote battery status
Current ignition key NO.
Enable keys
Disable keys
FEM/BDC:
Key programming
Key information
Key programming processing
Key adding
Key detect
Function introduction
Operation guide
Other functions

14-1

VVDI2 or Tango? Which is better for auto key programming?

Topic: VVDI2 or Tango? Which is better for auto key programming?

Program keys: VVDI2 via OBD, Tango from dump

If you are going to make keys from dump and reading with a programmer buy Tango.
If you are looking to make keys over OBD buy VVDI2 is a good tool for BMW CAS/MB EZS. (read and write MB IR key)

Tango more features, VVDI2 good for OBD

Better buy VVDI2 with VVDI Prog

I personally prefer Tango good support and more features, xhorse it is also a very good for obd.
If you buy VVDI2 i also recommend complement with VVDI Auto Key Programmer.

Tango has guides with pics, free with standard tool

I don’t know VVDI2… but I have tango and it’s excellent so long as you have good programmers too like XPROG-M etc. Most makes/models have guides with pics. Also many makers are free with standard tool and you can just add when you need

VVDI2 + Tango better than Zed full

If you mean original Tango and VVDI2 full…than this group will be better than zed full, thats my opinion…but there is a lot of car that you will need to remove BCM’s, immo’s…etc because vvdi2 and tango are more eeprom based tools, except vvdi2 making bmw and vag over obd2, skp900 and obdstar are obd2 tools but cant help you with fiat, opel, renault and with some few brands

VVDI2 + VVDI Prog good for VAG + BMW

If you looking only for Car Key Programmer VAG + BMW , then VVDI2 and VVDI prog is way to go. No need any other tool. In VVDI2 you have also programmer similar to Tango that you can make keys buy dump, but 90% of VAG and BMW can be done by OBD in VVDI2.

VVDI programmer don’t have OBD it’s only for bench programming.

Good for CAS4, FRM, EZS, EWS4 and many more.

VVDI2 = VVDI + Tango + …

VVDI 2 from CnAutotool.com includes all the VVDI functions, the function of Tango…. has improved remote control generation and chip identification, and also enhanced the coil’s stability
Moreover, you don’t have to connect VVD2 with a computer or other devices to identify chip or detect remote frequently.

Conclusion:

VVDI2 wins! Wins in OBD making keys! Wins in VAG + BMW key programming.

VVDI2 BMW:

Correct odometer
Generate key
Unlock key
Fix CAS computer

VVDI2 VAG:

Read & write Immo4/Immo5 system
Learn key
Program BCM remote
K-Line instrument immobilizer box
Correct odometer
Program control unit
Unlock Immo1/Immo2 firmware protection
Support data manipulation tools

VVDI2 key programmer:

Program key chip
Generate specialized chips
Immobilizer data processing tool
Other key tools
Generate remote control