OBDSTAR, Xtool and Autel which to Program Ford EcoSport Smart Key?

What for Ford EcoSport smart key programming?
Autel, OBDSTAR, XTOOL– which can make it?
Here are the tests:
Autel IM100: Failed!
Obdstar X300 Pro3: Success!
Obdstar X100 Pro: Success!
XTOOL X100 PAD2: Success!
Test 1: Autel Im100 failed to program Ford EcoSport smart key
obdstar-x100-pro-ford-ecosport-1 obdstar-x100-pro-ford-ecosport-2
Security access failed!
It’s 2014 Ford EcoSport
On a side note, IM100 now is Autel MaxiIM IM508
Test 2: OBDSTAR X300 PRO3 can make a Ford EcoSport smart key
Get solution with x300.
Raoul Engoule Raoul tested it! It’s 2014 Ford EcoSport
Test 3: Obdstar X100 Pro has no problem with Ford EcoSport smart key program
obdstar-x100-pro-ford-ecosport-4 obdstar-x100-pro-ford-ecosport-5 obdstar-x100-pro-ford-ecosport-6 obdstar-x100-pro-ford-ecosport-7 obdstar-x100-pro-ford-ecosport-9 obdstar-x100-pro-ford-ecosport-10

obdstar-x100-pro-ford-ecosport-11 obdstar-x100-pro-ford-ecosport-13 obdstar-x100-pro-ford-ecosport-14


Done! It’s Ford EcoSport all keys lost
Note: you should have a pin code calculator like FMPC001 Ford incode calculator or VPC-100 for security codes.
X100 pro cannot get the code itself.
Test 4: Xtool X100 Pad2 can read security codes & add smart EcoSport keys


Success! X100 Pad2 can read security codes and add smart keys…all done on its own!
For Ford EcoSport smart key program, you’d better have an Obdstar key master X300 pro3 or Xtool pad2.
Both can read PIN and program a smart key.
With Obdstar X100 Pro, you must have another tool for security codes read. Besides, it stopped production.
With Autel IM100 (IM508), you need luck! it’s good for auto diagnostic tests and key programming to some cars.

How to save OBDSTAR X100 X300M Log Data?

What’s the advantages of OBDSTAR data logging?
You can send the log data to OBDSTAR engineer if somthing is wrong with your device.

Here’s the guide to save data of OBDSTAR hand-held devices (H-series tools, F-series tools, X100 Pro, X300M etc).

How to save data:
When it fails to communicate or program, please operate as below;
1. Connecting the device – Starting it-Pressing option-Pressing Data Logging-Pressing on-Pressing ESC – Back to the main menu.
2. Keep the device at “on” state, go to test the car, when it fails to do the program. power off the machine please.
3.Pull out the TF card where there is a LOG file.
4. Send us the LOG file and the engineer would analyse the data and figure out the reason.
Note: Every time when you power off the machine, Data Logging would be “OFF