What the Autel ms908s Pro can do for you

Autel Maxisys Pro MS908P Wireless printing may be tough to get your head about since it requires your MaxiSys to communicate together with your Computer via a network. This sounds a lot more difficult than it truly is.

Difficulty: Average. Expertise of installing a conventional printer is going to be a bonus.

Time: 10 – 20 mins primarily based on online connection and updates.

What to prepare:

* An active Internet connection on your Computer.
* A Wireless Network – like a broadband router.
* A Windows Primarily based Computer with full administrative Rights (be capable of run programs in administrative mode)
* To make certain the Pc is connected towards the network either wirelessly by way of Ethernet.
* Your Computer to possess Adobe Reader installed.
* The MaxiSys Pc Suite CD (positioned inside the box).

Firstly, possess a appear in the following diagram:

ms908p-1

So how does this diagram operate? Initial you need to set up the MaxiSys Print Driver in your Pc. Then you definitely connect your MaxiSys towards the identical network. Then, after you send a Print command from your MaxiSys, the MaxiSys will search the network for PCs that have the print driver installed. The MaxiSys (through being connected towards the similar network as your Computer) sends the information for the Computer, which in turn prints the data. Consequently, all the following have to be connected for the Exact same network and turned on;

* Your MaxiSys Tablet
* Your Pc
* Your Printer

After you have carried out this, stick to the measures below to set up the Print Driver on your Pc.

* Spot the Maxisys Pc Suite CD into your CD Drive. The software program might load automatically, but if not, Click Commence and after that My Laptop.
* You’ll want to now see a Orange Folder listed exactly where your CD drive usually is; this really is the Autel application CD. Double click to open this up. Inside this folder you must see an icon calledAutorun.exe. Click This. The welcome screen of the Computer suite really should now boot
* Around the Pc Suite screen, pick which Bluetooth Interface you’ve got (at time of going to publish, just about all UK users may have the black Bluetooth VCI unit, displayed on the appropriate) by clicking The installation will now begin.
* During installation you may be prompted to Set up Drivers or if you have a firewall, to let the computer software particular security preferences. This can be since the computer software is communicating together with your network. You need to accept these preferences or the computer software is going to be blocked and printing won’t work.
* As soon as installation has finished, you will need to open the MaxiSys Printer. To perform this click Startthen All Applications. Now scroll by means of your applications till you come across MaxiSys Computer Suite. Inside this folder you’ll discover MaxiSys Printer. Click on this Item.
* The Printer Driver will open and you will see a printer icon within the bottom suitable of your Computer, next towards the Time and Date. The Printer Driver is now installed.
* You might be prompted to execute an update (for example in the demonstration video above), in that case its a great concept to help keep the software program up to date. Bear in mind to constantly permit firewall preferences or new Autel drivers to become installed.

For those who have performed all the actions above and are nevertheless having issues, check the following:

* Does your Computer have an active world-wide-web connection?
* Does your Pc have complete administrative rights?
* Does yourMaxiSys have an active online connection? Are you able to load a web page in the tablets internet browser?
* Will be the MaxiSys printer icon loaded? Verify that the icon is being displayed in your system tray, next towards the Date and Time.
* Did you permit the right settings on your Firewall/Anti-virus if prompted?
* Do you’ve got Adobe Reader installed? Click hereto download the and install the latest version.

How to do MB SCN coding with Autel MaxiSys Pro MS908P

Many people know Autel Maxisys pro support Benz SCN Coding function.
Whats the SCN Coding ?  When replacing or flashing ME control unit or new Transmission control unit we must get new SCN, that is to say SCN coding. But they dont know how to do SCN Coding for Benz ? lets check the steps as following :
Step1: You should first connect Autel MS908P to J2534 ECU programming device and Benz car. Then start Autel MS908P and choose “Diagnostics”→ “Benz”→ “Automatic selection”


Then turn on ignition and wait a minute to read VIN. After read click “OK”.


Step2: Click “Programming” on main menu, next click “ME-SFI-Gasoline engine control”.


Click “Control module programming”→ “NEXT”→ “OK”→ “OK”.



Step3: Click “SCN coding”, you can see two steps.


Click “Step1”, soon you will see “Get SCN data from sever completed”. Then click “Step2”, wait a minute and you will see “Perform SCN coding completed”. Now you successfully use Autel MaxiSYS MS908P Pro to do Benz SCN coding in 3 steps.



By the way , Autel MaxiSYS MS908P Pro not only can do SCN coding but also has many other functions like diagnostics, ECU coding and flash programming, J2534 Reprogramming and so on. It covers more than 40 US, Asian and European vehicle makes till 2016.
Any other question for Autel MaxiSYS MS908 Pro , welcome to contact us any time www.cnautotool.com

How to repair BMW 328xi E90 window regulator by Autel MS908P

The story is that: a 2006 BMW 328xi E90 rear right window was not working, replaced window regulator but it was stuck not all the way up and down. Used Autel MS908P to repair window regulator OK! So share this success case here.

8-1
8-3

How Autel MS908P initialize BMW window regulator, reset BMW auto window?

Plug the J2534 ECU Programming Device into car OBD port. Then you can use it to connect Autel Tool  MaxiSys Pro MS908P with car via Wi-Fi.

8-4 8-3

Click “Diagnostics” and choose “BMW”.

8-4 8-5

Or you can directly click the VIN button at left upper corner, choose “Auto detect” and it will read VIN automatically and show vehicle information.

8-6 8-7

Now you need to connect car with power charger over 12V. Then put remote key into key slot and press car Start button.

8-8

Then go to “Hot Function”.

8-9

Choose “Window, door and roof” then “Initialize window regulators” function.

8-10 8-11

Follow the tips “Switch on terminal 15 (ignition)”, keep remote key in key slot and do not press the brake pedal, press car Start button to turn ignition to terminal 15.

Choose to initialize the “Passenger’s side, rear” window regulator.

8-12

The rear right window will automatically open and close.

After that you can roll up and down that window normally.

Autel MaxiSys MS908P successfully initialize BMW 328xi E90 On CnAutotool.com rear right window regulator! BMW auto window reset OK!
8-13

Autel MaxiSys MS908P Cannot Communicate after Upgrade (Solved)

Autel MaxiSys MS908 or Autel MaxiSys MS908P automotive diagnostic scanner can not communicate and diagnose vehicles after upgrade problem solution provided.

Problem:

One of the Autel MS908 scanner users has newly got the scan tool updated software he need to latest version, but the newly upgraded Maxisys system can not communicate/access to car.  So He decided to run an upgrade again.

But the device prompted it is the latest version. Then He tried to diagnose other models. He followed the system instruction to turn ignition switch to ON position, but the device still prompted turn ignition on and fail to communicate and diagnose any cars.

Possible reason:

Incorrect update procedure or did not upgrade software completely.

Solution:

Note: The solution fits Autel Maxisys MS908 Pro from CnAutotool.com as well.

Un-install all upgraded software
Come to Autel MS908 diagnostic scanner main unit, select “Data Manager” function

18-1

3) Select “Apps”

18-2

4) Delete upgraded software

18-3

5) Download and update the vehicle software you need again, wait the procedure completed.

18-4

6) Re-connect the Autel Maxisys MS908P with vehicle and perform diagnosis.

3 steps to do MB SCN Coding Online easily by Autel MS908P

This blog will show you how to do Mercedes SCN coding in 3 steps by Autel MaxiSys Pro MS908P. As you know, Benz SCN Coding Service will charge about $150 one time, but with Maxisys MS908P you can do it at your fingertips!

13-1

Why we need to do SCN coding?

When replacing or flashing ME control unit or new Transmission control unit we must get new SCN, that is to say SCN coding.

How use Autel MS908P to do MB SCN coding in 3 steps?

Step1. You should first connect Autel MS908P to J2534 ECU programming device and Benz car. Next start Autel Scanner Autel MS908P and choose “Diagnostics”→ “Benz”→ “Automatic selection”

13-2
13-3
13-4

Then turn on ignition and wait a minute to read VIN. After read click “OK”.

13-5

Step2. Click “Programming” on main menu, next click “ME-SFI-Gasoline engine control”.

13-6
13-7
Click “Control module programming”→ “NEXT”→ “OK”→ “OK”.

13-8 13-9

Step3. Click “SCN coding”, you can see two steps.

13-10
13-11

Click “Step1”, soon you will see “Get SCN data from sever completed”. Then click “Step2”, wait a minute and you will see “Perform SCN coding completed”. Now you successfully use Autel MaxiSYS MS908 Pro to do Benz SCN coding in just 3 steps!

13-12 13-13 13-14

Of course,  Maxisys Pro MS908P Pro from CnAutotool not only can do SCN coding but also has many other functions like diagnostics, ECU coding and flash programming, J2534 Reprogramming, etc. It covers more than 40 US, Asian and European vehicle makes till 2017.

Autel Maxisys Elite Better than Autel Maxisys Pro 908p

Most of us know about Autel products , but which model of Autel products is the best equipment ? We’d like to recommend Autel Maxisys Elite will be the best one from Autel factory .

AUTEL MaxiSys Elite, its the newest addition to the MaxiSys line of highly advanced smart diagnostic tools, is based on the fast and intuitive Android operating system. Autel maxisys elite has the all the functions of Maxisys pro 908p. Auto diagnostic obd Wifi maxisys elite added ECM function than Maxisys pro 908p.

AUTEL MaxiSys Elite Hardware running speed is twice than Maxisys MS908P and MaxiSys Elite provides extended battery life and intelligent power saving. More differences between these 2 items as bellow :

Autel Model Autel Maxisys Pro Autel Maxisys Elite
Operating System AndroidTM 4.0 Android 4.4.4 KitKat
Processor Samsung Exynos Quad-Core Processor 1.4GHz NVIDIA TegraR 4 (4-PLUS-1 Quad-core Processor) 1.8GHz
Display 9.7 LED with 1024x768P resolution 9.7 Retina display with 2048X1536
Camera Rear: 8.0 Megapixel, Autofocus with Flashlight
Front: 2.0 Megapixel
Rear-facing, 5.0 Mexgapixel, AF with Flashlight
Connectivity 2.0 USB;Ethernet;WIFI;Bluetooth 3.0 USB (2.0 Compatible);HDMI;Ethernet;WIFI;Bluetooth
Internal Battery 11000 mAh 3.7 V lithium-polymer battery 3.7V/13600mAH Lithium-polymer battery

 

By the way , all these 2 items we offer 2 years free update online service . Any interesting , please dont hesitate to contact us any time .

Thank you

How to repair BMW 328xi E90 window regulator by Autel MS908P?

The story is that: a 2006 BMW 328xi E90 rear right window was not working, replaced window regulator but it was stuck not all the way up and down. Used Maxisys MS908P to repair window regulator OK! So share this success case here.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-1.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-2.jpg

How Autel MS908P initialize BMW window regulator, reset BMW auto window?

Plug the Autel Scanner J2534 ECU Programming Device into car OBD port. Then you can use it to connect Autel MaxiSys Pro MS908P with car via Wi-Fi.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-3.jpg

Click “Diagnostics” and choose “BMW”.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-4.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-5.jpg

Or you can directly click the VIN button at left upper corner, choose “Auto detect” and it will read VIN automatically and show vehicle information.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-6.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-7.jpg

Now you need to connect car with power charger over 12V. Then put remote key into key slot and press car Start button.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-8.jpg

Then go to “Hot Function”.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-9.jpg

Choose “Window, door and roof” then “Initialize window regulators” function.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-10.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-11.jpg

Follow the tips “Switch on terminal 15 (ignition)”, keep remote key in key slot and do not press the brake pedal, press car Start button to turn ignition to terminal 15.

Choose to initialize the “Passenger’s side, rear” window regulator.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-12.jpg

The rear right window will automatically open and close.

After that you can roll up and down that window normally.

Autel Maxisys Pro MS908P successfully initialize BMW 328xi E90 rear right window regulator! BMW auto window reset OK!

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-13.jpg

Autel MS908P Authorization Check Failed Error Code 3 (solved)

http://forobd2tool.com/wp-content/uploads/2017/06/22/24-1.jpg

This is the solution of “Authorization Check Failed” with fault 3 on Autel MaxiSys MS908P Diagnostic system.

error message:

Authorization Check Failed!

Error Code 3

http://forobd2tool.com/wp-content/uploads/2017/06/22/24-2.jpg

Causes:

If you changed language, you can get this error

How to solve MS908P Authorization problem:

connect to the internet

log in PC Suit upgrade tool on networked computers

Obtain authorization automatically

If this serial number to determine the corresponding Autel ID, you can contact technical support queries.

Hope this helps those autel MS908P users by CnAutotool.com!