Reasons for CGDI MB“Load File Failed, error code: 27E1”

Here’s the issues for CGDI MB key programmer error: “Load File Failed, error code: 27E1”

Possible reasons that cause the error:

1).  Device fell on the ground and damaged

2).  Take apart the CGDI main unit manually

CGDI Prog MB host is equipped with an encrypted battery. If you disassemble the programmer, the encrypted battery will power off automatically. Benz Monster software refuses to run properly.

What’s more, the battery cannot be purchased separately nor installed by yourself.

The ONLY solution is to send CGDI back to repair.

 

Note:

Always read CGMB label and directions carefully before beginning use.

For more details , please feel free to contact us directly , sale@cnautotool.com

 

 

How to Use CG100 Prog to Read & Write 93C66 Chip

Here CnAutotool.com show you a test report on CG100 Prog read and write 93c66 chip.It is very convenience and fast to operation.

What you Need?

CG100 Programmer

CG100 ATMEGA Adapter

Procedures:

Install 93C66 chip on EEPROM adapter,and install EEPROM adater on ATMEGA adapter

How - to - Use - CG100 - 1

Connect ATMEGA adapter to CG100

How - to - Use - CG100 - 2

Run CG100 software,and click “Programmer”

How - to - Use - CG100 - 3

Select “Serial Flash”àSelect “93C66”

How - to - Use - CG100 - 4

Click “Read” button to read

How - to - Use - CG100 - 5

Reading succeeded
How - to - Use - CG100 - 6 How - to - Use - CG100 - 7

And before operating writing,please save the original 93C66 data file on you compute in case data damaged.

How - to - Use - CG100 - 8

Now we change digits from 00000000 line to 00000010 line to “00”,then click “Write” button to start writing

How - to - Use - CG100 - 9 How - to - Use - CG100 - 10

Writing succeeded

How - to - Use - CG100 - 11

After then you can try to read the 93C66 data again to check if the writing operation successfully.

How - to - Use - CG100 - 12

Done!

AK500 Pro VS AK500+

AK500 Pro2 is the most advanced benz key programmer in the world as we mentioned before. And AK500 Pro is the only machine in the world that has KEY-LESS go writing function.

AK500+ is also an popular benz Key Programmer, it supports most Benz before year 2009, and it is much cheaper than AK500 PRO.

3-1