Ktag 7.020 Update- Change CID SD Card

This is the Ktag 7.020 firmware master clone and SD card method. With thanks to ovi730 and SVVAG2000 Now the solution of 7.020 is complete Attached firmware of 7.020 ktag – no crp lock to cpu , SD image and necessary sd CID Ktag 7.020 firmware crp0 ok tested L00000000

Read and Write BMW Bosch DME MEVD172G with KTAG KTM100

Purpose: DIY – DME/ECU Read Write and Tuning  2016MY F82 M using KTAG KTM100 master clone ecu tuning tool. Disclaimer: Credit to su_root on bimmer forum provided the document for educational purposes. We are not responsible for any direct or indirect damage that may occur to your property as a result

Ktag master ECU programming tool use tips

This post will answer all of following questions on K-TAG ECU Programming including optional version, compatible vehicles, workable software, the difference among all available KTAG, tokens reset method and Ktag FAQ etc. 1.Ktag master ECU programming tool optional version Following optional KTAG is compatible with most world-wide cars, and a little

K-TAG ECU Programming Tool Master Set KTAG FW v6.070 – SW v2.15

K-TAG ECU Programming Tool Master Set KTAG FW v6.070 – SW v2.15 The new K-TAG is 100% J-Tag compatible, but in a completely different way. Usually J-Tag programmers are available only for big productions, never present in chiptuning devices. Using only the essential components, Alientech have merged J-Tag, Motorola BDM/Nexus

Ksuite Installation Tips for Kess V2 V2.15 Ktag V6.070

KESS V2 V2.15 and K-TAG ECU Programming V2.13 V6.070 are both popular ECU tools. Here is a guide article to solve some errors on installation. Question from Customer A: When I installed the software kess V2 V2.15, the caution of “Ross-Teck cable installed” was always appeared on the computer screen. I even