How to check BMW ICOM firmware need update + how update it?

BMW ICOM A2 diagnostic interface failed to be connected, because the firmware is too old and need to upgrade it.

 

Firstly, you need to learn how to check BMW ICOM firmware need update.
update the firmware of BMW ICOM Interface. You have no need to update it if it says FREE.Please read the above photo. It shows FIRMWARE in red frame, that mean you need to

Secondly, update the firmware of BMW ICOM Diagnostic tool step by step.

1.Power on your icom interface by OBD cable, and connect it to computer by LAN cable. PLEASE make sure they are connected well because your interface might be damaged if disconnection during updating.

2.After connected, open the file ENGINEER TOOL on the desktop and you will see a file named ICOM FIRMWARE UPDATE. They are 2 BINs inside of it, ICOM-APPLICATIONIMAGE-XXX and ICOM-BOOTIMAGE-XXX. They are the files

3.Open your IE and input the IP address of your icom. If you do not know what is the IP of your icom, you can use ISTA-D to find it. As below, the IP in green frame is the IP of your ICOM. It needs ID and password to enter in, the ID is root,pw is NZY11502.

After entering into ICOM by IE.Click UPDATE FIRMWARE and choose ICOM-BootImage-XXX.bin,choose Image type as SYSTEM and click SEND THE FILE. Click YES when he say Write the image file to the flash? You will see the red right blinks after that.

 

5.Now we click UPDATE FIRMWARE and choose ICOM-ApplicationImage-xxx.bin and then choose the Image type as APPLICATION and then click SEND THE FILE. Click YES when he says Write the image file to the flash?

6.Reboot your ICOM interface after you update those APPLICATIONIMAGE and Bootimage. And you need to wait for few minutes. Go to ISTA-D again, you will see the FRIMWARE turn to FREE. That means your interface is matched to latest BMW ICOM ISTA software.
bmw-icom-a2-firmware-update-6

Done!

Hope it helps!

Any question, please feel free to contact www.cnautotool.com, email at: Sale@cnautotool.com

Thanks for reading!

2019.5 BMW ICOM Software HDD ISTA-D 4.09.13 ISTA-P 3.63.2.001 Engineering Mode support Windows 7 $99

bmw-icom-a2-firmware-update-7

New BMW ICOM A3+B+C+D Plus EVG7 Controller Tablet PC with WIFI Function

Software Version : V2018.12
ISTA – D: 4.12.12,with SDP data 4.12.12
ISTA – P: 3.65.0.500 with Engineer Programming
can program F/G/I/K chassis for car (through the ICOM, not other cable )
Vin: V2018.08

BMW ETK: 2018.11
BMW KSD: 2018.11 Multilanguage
BMW FSC Navigation Code Generator
BMWAiCoder for BMW Coding
Multi-language available in diagnosing, programming and TIS diagram circuit: American English, British English, German, Spanish, French, Italian, polish, Portuguese, Turkish, Czech, Swedish, Dutch, Indian, Greek, Russian, Simplified Chinese, Traditional Chinese, Japanese, Korean and Thai.

System Requirements:
Dual-core processor, better above I3; over 4G of memory

EVG7 DL46/HDD500GB/DDR4GB Diagnostic Controller Tablet PC:
Mark : EVG7
Model : DL46
Processor : Intel Celeron 1037(Dual – 1.8Ghz/L3 2M)
DDR : The biggest support memory : 4GB
HDD : 500 GB SATA HDD.
LCD : 10.4 Inch The resolution of the 1024×768
Graphics : touchscreen widescreen LED backlight, the core graphics Intel HD Graphics
Speakers : Built-in Speakers
Wireless : 802.11b/g/n
LAN : The built-in 10-100M card
Bluetooth : BT2.0 , 4.0
USB : USB3.0 / Mini USB / 2 x USB2.0
Card Reader : TF Card Reader
Other Interface : VGA Voice Input / The Sound Output / DC Power Jack / Parallel LPT Port I/O VGA Output
Battery Type : 9 The core of lithium batteries 10.08V 6600 mAh
Power Adapter : 110V-240V The adaptive communication power supply
Battery Life : The specific time depending on the use environment
Specifications : 270x180x60 mm
weight : 1911g (with battery)
Certificates : CE / FCC /  RoHS

ICOM A3+B+C+D Function:
1. A3- OBD diagnostic supporting MOST, D-CAN and K-CAN protocols
2. B – diagnostic via MOST bus, and have connection to A-interface via USB connection.
3. C – 20-pin cable for old models.
4. D- ICOM-D Motorcycles Motobikes Diagnostic Cable
 
BMW ICOM A3 Features:
1. BMW ICOM A3 Hardware Version: V1.40
2. Support Vehicles: BMW Cars, BMW Motorcycle, Rolls-Royce, Mini Cooper
3. Support BMW All Series Diagnose and Programming
4. Device main board contain WIFI chip, package come with WIFI adapter. Support wireless connection between ICOM A3 and laptop. But when you do programming, can not use WIFI, it is not as stable as cables.

Top 5 Reasons to Get BMW ICOM A3 with Latest Software
1.BMW ICOM A3 Hardware Version: V01.40.05
2.Support Vehicles: BMW Cars, BMW Motorcycle, Rolls-Royce, Mini Cooper
3.Support BMW All Series Diagnose and Programming
4.With Bonus Engineer Programming Software
NEW EVG7 DL46/HDD500GB/DDR4GB Diagnostic Controller Tablet PC Ready to Use

Package Including:
1pc x BMW ICOM A3 Interface
1pc x BMW ICOM B Most
1pc x BMW 20pin Cable
1pc x USB Cable
1pc x OBD2 Cable
1pc x LAN Cable
1pc x BMW ICOM D Cable
1pc x EVG7 DL46/HDD500GB/DDR4GB Diagnostic Controller Tablet PC

1-11-21-3

BMW ICOM A2 With V2018.12 Engineers software

Top 5 Reasons to Get BMW ICOM A2+B+C
1.BMW ICOM A2+B+C Hardware Version: V01.40.05
2.Support Vehicles: BMW Cars, BMW Motorcycle, Rolls-Royce, Mini Cooper
3.Support BMW All Series Diagnose and Programming
4.With Bonus Engineer Programming Software
5. NEW EVG7 DL46/HDD500GB/DDR4GB Diagnostic Controller Tablet PC Ready to Use

This is the package offer for BMW ICOM A2+B+C for with 2018.12V Software Plus EVG7 Diagnostic Controller Tablet PC, buy them together, save you a lot.Our engineer can install and test ok for you to use.

Compatible with BMW ICOM, ICOM A2, ICOM Next and ICOM PRO+A3

Software Version : V2018.12
ISTA – D: 4.12.12,with SDP data 4.12.12
ISTA – P: 3.65.0.500 with Engineer Programming
can program F/G/I/K chassis for car (through the ICOM, not other cable )
Vin: V2018.08

BMW ETK: 2018.11
BMW KSD: 2018.11 Multilanguage
BMW FSC Navigation Code Generator
BMWAiCoder for BMW Coding

BMW ICOM V2018.12 , With free Software:
1. Get engineer version, INPA 5.00,winkfp 5.2.3,NCS 3.5.1, e-sys 3.30.1,data V64.2
2. get Chinese software DR.GINI B020
3. get count code navigation tool software FSC operator code
4. get one-clik hidden brush tool BMWAi V4.6
5. Add DIS Software for Old cars, DISV57 and DISV44,diagnostic and ecu programmer
and BMW AiCoder

Support Model:

It is recommended to use Lenovo ThinkPad: T61, T400, T410, T420, T430, X61, X200, X201, X220 X230 and other laptop with Intel chipset, such as I3 I5 / I7 series.

EVG7 DL46 Specification:

Mark : EVG7

Model : DL46

Processor : Intel Celeron 1037(Dual – 1.8Ghz/L3 2M)

DDR : The biggest support memory : 4GB

HDD : 500 GB SATA HDD.
LCD : 10.4 Inch The resolution of the 1024×768

Graphics : touchscreen widescreen LED backlight, the core graphics Intel HD Graphics

Speakers : Built-in Speakers

Wireless : 802.11b/g/n

LAN : The built-in 10-100M card

Bluetooth : BT2.0 , 4.0

USB : USB3.0 / Mini USB / 2 x USB2.0

Card Reader : TF Card Reader

Other Interface : VGA Voice Input / The Sound Output / DC Power Jack / Parallel LPT Port I/O VGA Output

Battery Type : 9 The core of lithium batteries 10.08V 6600 mAh

Power Adapter : 110V-240V The adaptive communication power supply

Battery Life : The specific time depending on the use environment

Specifications : 270×180×60 mm

weight : 1911g (with battery)

Certificates : CE / FCC / RoH

5-1
5-2
5-3
5-4
5-5

5-6