Tag: CG100

Reasons for CGDI MB“Load File Failed, error code: 27E1”

Here’s the issues for CGDI MB key programmer error: “Load File Failed, error code: 27E1” Possible reasons that cause the error: 1).  Device fell on the ground and damaged 2).  Take apart the CGDI main unit manually CGDI Prog MB host is equipped with an encrypted battery. If you disassemble the programmer,

How to Use CG100 Prog to Read & Write 93C66 Chip

Here CnAutotool.com show you a test report on CG100 Prog read and write 93c66 chip.It is very convenience and fast to operation. What you Need? CG100 Programmer CG100 ATMEGA Adapter Procedures: Install 93C66 chip on EEPROM adapter,and install EEPROM adater on ATMEGA adapter Connect ATMEGA adapter to CG100 Run CG100 software,and

How to Clear and Synchronize BMW EGS ISN with CGDI BMW?

How to: clear & synchronize BMW CAS with EGS using CGDI Prog BMW MSV80 key programmer. Note: To have CGDI BMW EGS authorization, you should have at least one another CGDI Programmer, i.e CG100, CG Pro 9S12, CGDI MB etc.  Then provide your devices serial number to activate the authorization.