Tag: CG PRO

Reasons for CGDI MB“Load File Failed, error code: 27E1”

Here’s the issues for CGDI MB key programmer error: “Load File Failed, error code: 27E1” Possible reasons that cause the error: 1).  Device fell on the ground and damaged 2).  Take apart the CGDI main unit manually CGDI Prog MB host is equipped with an encrypted battery. If you disassemble the programmer,

How to solve CG Pro 9S12 error “Erase Failed”

Here are solutions for any user gets in troubles when using a CG Pro programmer for 35160WT chip. The error message: Erase failed The cg pro 9s12 programmer and 35160wt adapter: The solution: FYI, the cg pro can work for 80% 35160WT chips only. The same as Xhorse vvdi prog or

How to Use CG100 Prog to Read & Write 93C66 Chip

Here CnAutotool.com show you a test report on CG100 Prog read and write 93c66 chip.It is very convenience and fast to operation. What you Need? CG100 Programmer CG100 ATMEGA Adapter Procedures: Install 93C66 chip on EEPROM adapter,and install EEPROM adater on ATMEGA adapter Connect ATMEGA adapter to CG100 Run CG100 software,and

CG Pro adds Ford Kia Hyundai Kawasaki Suzuki etc Key Generation

Good news!!! CG PRO 9S12 programmer released a big update on June 5th, 2019.   CG-Pro V2.1.3.0 software adds lots of chip types, Benz EIS-906 (ST12) IMMO and lots of key generation models, i.e Ford,  Jaguar, Chevrolet, Hyundai, Kia, Mazda, Kawasaki, Mitsubishi, Subaru and Suzuki. CG-Pro V2.1.3.0  NEW (2019.06.05) 1.Add Benz Immobilizer