How to repair BMW 328xi E90 window regulator by Autel MS908P

The story is that: a 2006 BMW 328xi E90 rear right window was not working, replaced window regulator but it was stuck not all the way up and down. Used Autel MS908P to repair window regulator OK! So share this success case here.

8-1
8-3

How Autel MS908P initialize BMW window regulator, reset BMW auto window?

Plug the J2534 ECU Programming Device into car OBD port. Then you can use it to connect Autel Tool  MaxiSys Pro MS908P with car via Wi-Fi.

8-4 8-3

Click “Diagnostics” and choose “BMW”.

8-4 8-5

Or you can directly click the VIN button at left upper corner, choose “Auto detect” and it will read VIN automatically and show vehicle information.

8-6 8-7

Now you need to connect car with power charger over 12V. Then put remote key into key slot and press car Start button.

8-8

Then go to “Hot Function”.

8-9

Choose “Window, door and roof” then “Initialize window regulators” function.

8-10 8-11

Follow the tips “Switch on terminal 15 (ignition)”, keep remote key in key slot and do not press the brake pedal, press car Start button to turn ignition to terminal 15.

Choose to initialize the “Passenger’s side, rear” window regulator.

8-12

The rear right window will automatically open and close.

After that you can roll up and down that window normally.

Autel MaxiSys MS908P successfully initialize BMW 328xi E90 On CnAutotool.com rear right window regulator! BMW auto window reset OK!
8-13

Autel MaxiSys MS908P Cannot Communicate after Upgrade (Solved)

Autel MaxiSys MS908 or Autel MaxiSys MS908P automotive diagnostic scanner can not communicate and diagnose vehicles after upgrade problem solution provided.

Problem:

One of the Autel MS908 scanner users has newly got the scan tool updated software he need to latest version, but the newly upgraded Maxisys system can not communicate/access to car.  So He decided to run an upgrade again.

But the device prompted it is the latest version. Then He tried to diagnose other models. He followed the system instruction to turn ignition switch to ON position, but the device still prompted turn ignition on and fail to communicate and diagnose any cars.

Possible reason:

Incorrect update procedure or did not upgrade software completely.

Solution:

Note: The solution fits Autel Maxisys MS908 Pro from CnAutotool.com as well.

Un-install all upgraded software
Come to Autel MS908 diagnostic scanner main unit, select “Data Manager” function

18-1

3) Select “Apps”

18-2

4) Delete upgraded software

18-3

5) Download and update the vehicle software you need again, wait the procedure completed.

18-4

6) Re-connect the Autel Maxisys MS908P with vehicle and perform diagnosis.

3 steps to do MB SCN Coding Online easily by Autel MS908P

This blog will show you how to do Mercedes SCN coding in 3 steps by Autel MaxiSys Pro MS908P. As you know, Benz SCN Coding Service will charge about $150 one time, but with Maxisys MS908P you can do it at your fingertips!

13-1

Why we need to do SCN coding?

When replacing or flashing ME control unit or new Transmission control unit we must get new SCN, that is to say SCN coding.

How use Autel MS908P to do MB SCN coding in 3 steps?

Step1. You should first connect Autel MS908P to J2534 ECU programming device and Benz car. Next start Autel Scanner Autel MS908P and choose “Diagnostics”→ “Benz”→ “Automatic selection”

13-2
13-3
13-4

Then turn on ignition and wait a minute to read VIN. After read click “OK”.

13-5

Step2. Click “Programming” on main menu, next click “ME-SFI-Gasoline engine control”.

13-6
13-7
Click “Control module programming”→ “NEXT”→ “OK”→ “OK”.

13-8 13-9

Step3. Click “SCN coding”, you can see two steps.

13-10
13-11

Click “Step1”, soon you will see “Get SCN data from sever completed”. Then click “Step2”, wait a minute and you will see “Perform SCN coding completed”. Now you successfully use Autel MaxiSYS MS908 Pro to do Benz SCN coding in just 3 steps!

13-12 13-13 13-14

Of course,  Maxisys Pro MS908P Pro from CnAutotool not only can do SCN coding but also has many other functions like diagnostics, ECU coding and flash programming, J2534 Reprogramming, etc. It covers more than 40 US, Asian and European vehicle makes till 2017.

Autel Maxisys Elite Better than Autel Maxisys Pro 908p

Most of us know about Autel products , but which model of Autel products is the best equipment ? We’d like to recommend Autel Maxisys Elite will be the best one from Autel factory .

AUTEL MaxiSys Elite, its the newest addition to the MaxiSys line of highly advanced smart diagnostic tools, is based on the fast and intuitive Android operating system. Autel maxisys elite has the all the functions of Maxisys pro 908p. Auto diagnostic obd Wifi maxisys elite added ECM function than Maxisys pro 908p.

AUTEL MaxiSys Elite Hardware running speed is twice than Maxisys MS908P and MaxiSys Elite provides extended battery life and intelligent power saving. More differences between these 2 items as bellow :

Autel Model Autel Maxisys Pro Autel Maxisys Elite
Operating System AndroidTM 4.0 Android 4.4.4 KitKat
Processor Samsung Exynos Quad-Core Processor 1.4GHz NVIDIA TegraR 4 (4-PLUS-1 Quad-core Processor) 1.8GHz
Display 9.7 LED with 1024x768P resolution 9.7 Retina display with 2048X1536
Camera Rear: 8.0 Megapixel, Autofocus with Flashlight
Front: 2.0 Megapixel
Rear-facing, 5.0 Mexgapixel, AF with Flashlight
Connectivity 2.0 USB;Ethernet;WIFI;Bluetooth 3.0 USB (2.0 Compatible);HDMI;Ethernet;WIFI;Bluetooth
Internal Battery 11000 mAh 3.7 V lithium-polymer battery 3.7V/13600mAH Lithium-polymer battery

 

By the way , all these 2 items we offer 2 years free update online service . Any interesting , please dont hesitate to contact us any time .

Thank you

Autel maxisys ms908pro VS autel maxisys ms906 VS autel ms906BT VS autel ms906TS

Autel maxisys ms908 pro, autel maxisys Elite, maxisys ms906, , autel maxisys ms906bt, maxisys ms906ts all same manufacturer.  but what’s the difference of them ? Here is the comparison as following:

1-1

The main differnce is autel maxisys ms908p with programming function,others without this function

autel maxisys ms908 pro itself has already supported ECU programming function for BENZ and BMW cars, if you need to get support for more car models, you must use J2534 device along with OEM software to implement this function. J2534 DEVICE can not only use with AUTEL MAXISYS Pro , but also can work on other OEM software.

1-2

Using additional OEM software, the MaxiFlash Pro can be used as a Pass-Thru diagnostics tool as well, which allows users to read and clear Diagnostic Trouble Codes (DTCs) and data log PIDS, collect sensor data and log generic OBDII data etc.

Autel ms908pro, MaxiSYS Elite, autel maxisys ms906, autel ms906bt, ms906ts  in different shapes are all excellent diagnostic tablets with full basic function and a wide range of vehicle coverage

autel maxisys ms908 pro programming steps :

1-3
1-4
1-5
1-6
1-7
1-8
1-9

If you have any  question or problems about autel maxisys ms908p, please contact us www.cnautotool.com  we can help you solve it .

How to repair BMW 328xi E90 window regulator by Autel MS908P?

The story is that: a 2006 BMW 328xi E90 rear right window was not working, replaced window regulator but it was stuck not all the way up and down. Used Maxisys MS908P to repair window regulator OK! So share this success case here.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-1.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-2.jpg

How Autel MS908P initialize BMW window regulator, reset BMW auto window?

Plug the Autel Scanner J2534 ECU Programming Device into car OBD port. Then you can use it to connect Autel MaxiSys Pro MS908P with car via Wi-Fi.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-3.jpg

Click “Diagnostics” and choose “BMW”.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-4.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-5.jpg

Or you can directly click the VIN button at left upper corner, choose “Auto detect” and it will read VIN automatically and show vehicle information.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-6.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-7.jpg

Now you need to connect car with power charger over 12V. Then put remote key into key slot and press car Start button.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-8.jpg

Then go to “Hot Function”.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-9.jpg

Choose “Window, door and roof” then “Initialize window regulators” function.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-10.jpg

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-11.jpg

Follow the tips “Switch on terminal 15 (ignition)”, keep remote key in key slot and do not press the brake pedal, press car Start button to turn ignition to terminal 15.

Choose to initialize the “Passenger’s side, rear” window regulator.

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-12.jpg

The rear right window will automatically open and close.

After that you can roll up and down that window normally.

Autel Maxisys Pro MS908P successfully initialize BMW 328xi E90 rear right window regulator! BMW auto window reset OK!

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/3-13.jpg

Autel MS908P Authorization Check Failed Error Code 3 (solved)

http://forobd2tool.com/wp-content/uploads/2017/06/22/24-1.jpg

This is the solution of “Authorization Check Failed” with fault 3 on Autel MaxiSys MS908P Diagnostic system.

error message:

Authorization Check Failed!

Error Code 3

http://forobd2tool.com/wp-content/uploads/2017/06/22/24-2.jpg

Causes:

If you changed language, you can get this error

How to solve MS908P Authorization problem:

connect to the internet

log in PC Suit upgrade tool on networked computers

Obtain authorization automatically

If this serial number to determine the corresponding Autel ID, you can contact technical support queries.

Hope this helps those autel MS908P users by CnAutotool.com!

Questions and Answers for Autel MaxiSys Pro MS908P

Autel Maxisys Pro MS908P includes the J-2534 reprogramming box and special MaxiSYS Pro software needed for shops and technicians who demand a comprehensive diagnostic system capable of completing even the most complicated and demanding tasks. We offer 2 years free update, and it’s 100% original. You can get support from the official autel website: http://support.autel.com/support/home. The following are some questions and answers for the Autel MS908P:
Q1: Hey everyone :-) , I want to know what is the general steps for matching new key for the supported cars by my maxisys MS908p … I have tried to match a new smart key for a mazda 3 2009 but I didn’t quite understand what should I do when the device asked me for an online codes … any help :-)
A1:Okay so for Mazda PATS you will need to do an Incode/Outcode conversion…they’re 2 types of outcodes single and dual, the tool will give you either type with a code
Example Single Oucode:
0040
Example Dual Outcodes:
1DC0BE-000000
Now you need a calculator to convert the outcodes into incodes
Go to www.autokeyprog.com and create an account it’s free
Now go under the services tab
Then PATS login calculator
Type in those Outcodes your tool gave you, the calculator will convert them to incodes

Q2:Just purchased maxysys pro, connected to internet, registered, update was available so updated it. now every time i turn it on i get error message ” Unfortunately, Exchange services has stopped”.
any suggestions ?
A2:If you get error message “Unfortunately, Exchange has stopped” on Maxisys series tablet, please try the following steps:
Please press and hold Email icon on the main screen, then move it to the top where you can see App info. Click at “Clear data” and then reconfigure your email. Thanks!

Autel MaxiSys pro MS908P Highlight:

The Autel MaxiSys MS908 PRO is the most comprehensive OBD2 TOOL for the professional technician who performs J-2534 reprogramming on a regular basis. The WIFI Autel MaxiSys Pro MS908P supports diagnostic and programming functions for multi-brand vehicle systems. Following are the software register, install and update instruction.

Autel MaxiSys pro MS908P Highlight:
1.Autel Maxisys Pro can do online programming ,at the same time it’s compatiable for diagnosis and online programming for part of the original software.
2. MaxiSys Pro HAVE 6 Kinds of languages for you choose:English,German, French, Spanish,Portuguese
3. Extensive vehicle coverage for more than 40 US, Asian and European vehicle makes
4.MaxiSYS Pro includes the J-2534 reprogramming box and special MaxiSYS Pro software
5.The VCI connects wirelessly to the main unit with ultra-range Bluetooth / WIFI
6.Intelligent memory of vehicles for easy and quick diagnosis of tested vehicles

The ICarScan (vehicle communication interface) can turn your Android smartphone / tablet into a professional automotive diagnosis tool. Users can communication with automotive’s OBDII socket via BlueTooth with an Android smartphone/ tablet, to achieve full systems and full function diagnosis, include reading/ clearing trouble codes, data stream, actuation test, adaptation, ECU coding & programming, oil reset, other special function, etc.

This product transforms your laptop or computer into an automobile analysis system that will verification live facts from the computer system within your automobile. A strong OBD signal target audience is a computer that is connected to your laptop OBD Scanner slot to gain access to technological data concerning ones car’s website. Car diagnostic tool such as elm327 bluetooth obdii scanner stands for On-Board Diagnostic Have a look at. Your resource helps you repair your entire vehicle challenge yourself because doing so can pin number level as well as track record every possibility that was diagnosed from a powerplant it doesn’t matter how smaller or perhaps significant it truly is. It will assist you to save occasion as well as capital that anyone can get spend on your kinetic business in making factors predetermined.

How to update Autel MaxiSys Pro firmware

The internal programming of the MaxiSys Diagnostic System, known as the firmware, can be updated using the Update application. Firmware updates increase the MaxiSys applications’ capabilities, typically by adding new tests, new models, or enhanced applications to the database.

To update the firmware
1.Power up the Autel MS908 PRO tablet and ensure that it is connected to a power source and with steady internet connection

2.Tap the Update application button from the MaxiSys Job Menu; or tap the update notification message when received one. The Update application screen displays.

3.Check all available updates:
If you decide to update all the items, tap the Update All button
If you want to update some individual items, tap the Update button on the right column of the specific item.

4.Tap the Pause button to suspend the updating process. When you tape Continue to renew the update, the updating process will resume from the break point.

5.When the updating process is completed, the firmware will be installed automatically. The new version will replace the original version if thee is one.

As for Honda Accord 2000 ABS not work, finally I noticed that Honda Accord 2000 ABS is through separate 5pin connector only not through Auto Diagnostic tool when I looked the wiring diagram. despite that it was not possible to read out codes from the ABS, not even with jump wire. Assuming that the control unit is faulty I start to measure connections and wheel sensors and found one of them broken. My son replaced it and that fixed the fault.

The strange thing is that it was not possible to read out codes with the jump wire…
I assuming to receive 5 pin adapter cable next week… will be back with the result.Another problem is I tried software on android tablet, not very good experience. First problem was while I tried to connect ICarScan VCI and got message that Firmware needs to be update but there were no way to do it. I got the update done via phone. After update it works somehow but very often it fails while trying connect to car or while it tries snoop the system of the car.