1. Easy Testing: plug in OBD cable, without any extra operation
2. Diagnose automatically: generate diagnostic reports and send to email automatically
3. Complete diagnostic functions: OBD2 + Full System Diagnosis
4. Update automatically: software update automatically while connecting with wifi
5. Real-time voice broadcast
6. The First Intelligent Inspections Tool in world
7. Only 2 mimutes to finish all system test
8. With 3 kinds of Diagnostic mode
Thinkplus language : English
Thinkplus Upgrade : 1 year free upgrade
Thinkcar Thinkplus automatically scans all makes, models, and modules. Then sends an email report to the default email address.
No human interaction is needed, just plug THINKPLUS into the OBD-II port and it starts scanning one of the pre-selected modes (OBD only, Full report w/o DataStream, Full report w/ DataStream).
THINKPLUS communicates as it calls out each module being scanned.
The THINKPLUS is the perfect solution for Collision/MSO shops that require a Pre and or Post scan report, without the need of a trained scan tool technician or reoccurring remote diagnostics service.
The THINKPLUS also has a 6000mAh Lithium-ion battery that charges itself when connected to a vehicle via the OBD II port.
LAUNCH ThinkPlus FEATURES:
Automatic Vehicle Detection and Scan Initialization as soon as you plug in – No interaction needed
WIFI enabled (WIFI or Mobile Hot Spot)
Easy to operate-Just Plug in and go
5″ Color Touch Screen Display
Long Battery life (up to one month on standby)
Rugged industrial Design
Enhanced All Module Scan: Fault Codes and Data Stream
Generic OBD II Only with Readiness Monitor Status
LAUNCH Thinkcar Function:
AI intelligent diagnosis, the world’s first fully intelligent diagnostic tool, you only need to register the product when you get it later.
1. Full intelligent automatic upgrade;
2. Automatically identify the VIN of the two cars and check the status of the two cars (three modes: OBD monitoring, full system diagnosis, full system diagnosis + data flow);
3. Send the detection report to the registered binding mailbox automatically;
Thinkplus Full system system :
Thinkplus can diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and China. Full range car models and full car system diagnose make it a professional automotive diagnostic tool.
Diagnosis functions include: Read DTCs, Clear DTCs, Read datastream, Special functions etc;
To diagnose Brake System if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;
To diagnose Emission System if the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;
To diagnose Fuel system if vehicle won’t start or “Check Engine” light is illuminated. Check car’s fuel system regularly ensures the best performance of your car with the lowest emissions;
To diagnose Transmission if your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car;
To diagnose Wiper System if you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly;
To diagnose Light System if you see rapid signal blinking or dimming lights.
LAUNCH Thinkcar Scanner SPEC：
Screen: 5″ touch screen
Built-in Storage: 8GB
Battery: 6000mAh – Li-ion
Working Temperature: -10 ~ 50°C
Storage Temperature: -20 ~ 60°C
1pc x Thinkcar Thinkplus Full System Scanner
1pc x OBD II Diagnostic Cable
1pc x DC 5V Charging Cable
1pc x User Manual
1pc x Power Adapter