Configuring Cat Electronic Technician to use the Communication Adapter 3
For Cat Electronic Technician to work with the Communication Adapter 3, the settings must be changed to select the Communication Adapter 3 as the Communication Interface Device:
Step 1 : Start Cat Electronic Technician.
Step 2 : Click the Stop Connect button when it appears.
Step 3 : Select the Utilities menu.
Step 4 : Choose “Preferences > Modify…”.
Step 5 : Select the Communications tab.
Step 6 : Select Cat Comm Adapter 3 (RP1210) and click OK.
NOTE: Because a growing number of products require multiple data link service, the “Enable Dual Datalink Service” checkbox has been pre-selected.
Servicing ECMs on more than one data link requires this check box to be enabled.
Failure to do this will result in undetected ECMs and reduced functionality.
Any request for CAT Caterpillar ET Diagnostic Adapter III , welcome to contact us any time