Year: 2018

SDconnect C4 Software Released Notes

Since 12.2017, DTS-Monaco and Vediamo were added to 12.2018 SD connect C4 software. That is the biggest difference from old versions (CnAutotool.com). 12.2018 XENTRY/DAS Released Notes: DAS Standalone Activated. W(2014) Activated in DAS. Offline Programming Activated. LKW EOL OFFLINE MENU & VMAX for Tucks activated. Smart Cars VIN reconfiguration PassFree

How to configure Xentry Connect C5

2018 Xentry Connect C5 user manual: how to configure/set up MB SD Connect C4/C5 to use for the first time Please have your XENTRY Connect MAC addresses (Wi-fi and LAN) enabled for the workshop network byyour IT supervisor/IT service provider in advance. You can read off theMAC addresses (Wi-fi and

How to configure Xentry Connect C5

2018 Xentry Connect C5 user manual: how to configure/set up MB SD Connect C4/C5 to use for the first time Please have your XENTRY Connect MAC addresses (Wi-fi and LAN) enabled for the workshop network byyour IT supervisor/IT service provider in advance. You can read off theMAC addresses (Wi-fi and

What is difference between AUTEL MaxiSys MS908 and AUTEL DS708?

  CnAutotool.com released Autel MS908.And are you curious about what is difference between AUTEL MaxiSys MS908 and AUTEL DS708?How about making a comparison on them? Here let’s have a look at their PK. Physical and fashionable design: AUTEL MaxiSys MS908 is designed with separate tablet PC and independent diagnostic box;while

BMW ICOM A2+B+C with 2018.07 Software Plus EVG7 Diagnostic Controller Tablet PC

  BMW ICOM A2+B+C with 2018.07 Software Plus EVG7 Diagnostic Controller Tablet PC Software Version : V2018.07 ISTA – D: V4.11.30,with SDP data V4.11.30 ISTA – P: 3.64.2 with Engineer Programming can program F/G/I/K chassis for car (through the ICOM, not other cable ) Vin: V2018.06 BMW ETK: 2018.06 BMW