Launch X431 Icarscan X-431 EasyDiag With 8 Free Softwares Online Update Support Iphone and Andriod

Launch X431 idiag  auto diagnostic scanner stop producing for long time ago, now there is a new product launch x431 icarscan can instead of it, function same as launch x431 idiag/X431 M-Diag and Launch X-431 Easydiag. It also can support for Multi-languages: English/Spanish/Russian/French/Chinese. And X-431 Icarscan can support both Andriod and Iphone system you can download the software both in this two system to diagnose car.

when you use the launch X431 icarscan if you appear the belows this problems you can contact with us for the solution.

when you download the software and the screen was stucked, you can delete all the software files delete the cnlaunch file, then download again the launch icarscan app to downlaod the software, pls note when you download one car software must be let it download finished 100% successfully and don’t do other operate and do not touch the screen, until it finished and install it automaticlly. then that will be ok.

anyway the launch x431 icarscan auto diag scanner we are the only one agent from launch. And all the information and the price are the best. if you have interest, pls feel no hesitate to contact us: sale@cnautotool.com

How to use NCS-Expert With BMW ICOM A2+B+C Diagnostic Scanner Wifi

The belows are the guid for customer how to use NCS-Expert With BMW ICOM A2 Wifi

it’s a dummy guide to help many out and try to make sense of NCS expert with BMW icom A2.
All said by a ICOM A2 user at bmw forum.

he said;

before all operation, you need a good icom A2 emulator, clone or original
I used clone bmw icom A2 wifi at:

http://www.cnautotool.com/search.php?keywords=BMW+ICOM&imageField=+

Used it for years and updated to ISTA-D 3.54 ISTA-P3.58 in SSD…much faster and more stable then, i have to mention that ALL Proceed at your own risk. this is just my interpretation for educational/entertainment value only. I am not responsible for you blowing up your car or damaging your modules.

so here goes the key point

Dummies Guide to Understanding NCS and Coding

This is roughtly how it works, and my dummy interpretation of it.Please read it fully if you want to understand, this isn’t exactly a quick cheat sheet guide.

On pre’02 cars the coding is slightly different method than post 02 cars. I am going to elaborate on coding individual parameters, you can go learn how to code entire modules thru the VO later once you learn the basics below.

The first part to understand is what this stuff about ZCS/VO or “vehicle order” is. When BMW makes a car, they create whats called a “vehicle. this basically a bunch of numbers writen into the car that tell what modules are installed in the car, regional info etc. This is like your car’s DNA! for example if the car has a sunroof, or a convertible or radio etc etc and that is was meant for US,Canada, France etc. Because each car is different with a different set of options/modules or country that its located, the” vehicle order” aka.”ZCS” or”VO” may be differnt. why is it called ZCS you ask ? because its abbreviated german, and its confusting as hell.

The VO is wrriten into a couple modules of the car, usually ones that start with an “A”, Like AKMB or ALSZ. On some cars its written elsewhere. In my 02 M3, the VO Was written in ALSZ and AKMB. On my “00328 Ci it was stored in EWS, KMB. Its nothing more than a string of text/numbers stored in the flash memory of these modules, nothing special. why is it written into two places? because if one module is failed and has to be replaced, then the other will serve as a backup so you can code the new replacement module to your car. for example ALSZ is the “light switch module” in your car .

BMW ICOM is the professional car diagnostic scanner for all bmw cars or trucks . and if you want more details about bmw icom you can contact with us :www.cnautotool.com or email us: sale@cnautotool.com.

2017 Launch X431 Pro Mini review – newer & better than many tools

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/3-0.png

I’m a Launch user living Canada, and couldn’t be happier with this Launch X431 Pro Mini Bluetooth. I would like to write an objective review on Launch X431 Pro Mini here. I really highly recommend it for following reasons.

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/3-1.jpg

X431 Pro Mini unit is small, the smallest of the scan tools that I’ve dealt with. This tool is the newest Launch product out on the market for 2017. I took a big risk in buying X431 Pro Mini because it wasn’t released in North America. But good thing it worked out because the updates for the software are newer than the ones in North America. Example: on the X431 pro Mini Porsche firmware V21.91. In current software from launchtechusa.com/ North America it’s V21.81.

http://www.forobd2tool.com/wp-content/uploads/2017/07/6/3-2.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/07/6/3-3.jpg

It’s all about the software, doesn’t matter where these machines are made, the software has to be current.

Previously I had the older Launch GDS which gave me issues with Acura, Honda, Toyota and Nissan. Thank god the issues have been fixed with this new X431 pro Mini unit. By far, the BMW, Benz and VW software is the best you can find on the market. I used and bought previous Snapon- Verus, Autel and PIWIS, Vagcom. This X431 Pro Mini tool by far is one of best well-rounded ones. The customer service from www.cnautotool.com is very nice and helpful too, they are prompt at answering any questions. The shipping also came on time! Faster than I expected.

I highly recommend CnAutotool.com also because its good price, X431 pro Mini price $725 incl. delivery. I compare its price with Amazon, it’s about $880, so save much.

Renault can clip “No Sensor Detected” solution – 100% working

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/23-1.jpg

This is the best solution from pros of Renault can clip error “No Sensor Detected, check the sensor connections and ensure that the supply to the vehicle is correct, then try again.”

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/23-2.jpg

Reasons for “No Sensor Detected”:

The error message pops up usually when run CLIP at the beginning, which means the the software cannot recognize the Renault CAN CLIP diagnostic interface

Solved by pros!

First, please check the Renault CLIP driver installation:

CLIP driver installation completes after running Crack Renault CLIP, installing Renault CLIP software, setting up CLIP properties, registering CLIP.

Here goes to install CAN CLIP v163/v162driver software….

The driver software is automatically installed

Open computer management

select Device manager->Bosch automotive service solution device->18-alliance vehicle communication interface

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/23-3.jpg

close Computer management

Open Display properties

Go to screen saver->power and setup:

power scheme: Always on

Turn off monitor: never, never

Turn off hard disk: never, never

System standby: never, never

Click on Apply, then OK to exit

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/23-4.jpg

if the driver has been set up as above, try run Professional Diagnostic Tool CLIP again. If the error message remains, please try the solutions below.

Second, check the connection of the renault can clip diagnostic tool and the car.

Using the OBD2 Tool to connect the can clip unit to the obd port on the car

http://www.forobd2tool.com/wp-content/uploads/2017/06/30/23-5.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/06/30/23-6.jpg
http://www.forobd2tool.com/wp-content/uploads/2017/06/30/23-7.jpg

And if all is well connected, the four LEDs should be lighted.

Good luck and enjoy clipping!