Chrysler Witech Micropod II Program 2014 Jeep Wrangler Add New Keys

Chrysler Witech Micropod II online version hot sale on cnautool.com, some custom order wiTECH micropod 2 from other supplier and stop work, we can offer wiTECH Chrysler diagnostic software installation service make wiTECH micropod 2 restart work. Or order wiTech Micropod 2 from cnautool.com directly. Below cnautotool.com customer share how to use wiTECH Micropod II add new key for 2014 Jeep Wrangler.

http://www.cnautotool.com/goods-5106-Chrysler+Diagnostic+Tool+wiTech+MicroPod+2.html


SUCCESS! Everything worked.
I was able to program the second key to my Jeep. You are amazing and I cannot thank you enough. Here is what I did on my 2014 Jeep Wrangler:
Situation: My Jeep came with only ONE key and I wanted a second key.
You must have Witech 16.05.15 or older installed. Witech 17 gave me errors about requiring Witech 2.0.
First try: (Failed, did not work)
Step 1) No key in the ignition, plugged in wiTECH Micropod 2 to OBDII port.
Step 2) Connected Micropod 2 to laptop via USB cable.
Step 3) Opened Witech and it asked me to identify my Jeep and enter my VIN.
FAILED at this point. It required internet connection to validate the VIN and asked me to log into Dealer CONNECT or Tech Authority.
Second try (SUCCESS!!)
Step 1) No key in the ignition, plugged in Micropod 2 to OBDII port.
Step 2) Put my single good key in the ignition and put it to the RUN position.
Step 3) Connected Micropod 2 to laptop via USB cable.
Step 4) Opened Witech and left it offline.
Step 5) Opened WCM, then Misc. Functions, then Program FOBIK
Step 6) Entered my dealer supplied PIN.
Step 7) Removed old key and inserted new key.
Step 8) Be happy I now have two working keys to my Jeep.

Any need for Chrysler wiTECH Micropod 2 Chrysler diagnostic tool Mopar Micropod 2 just contact us freely

Thank you

CNautotool team

How to Set up wiTech MicroPod 2 Chrysler Diagnostic Tool

This is a how-to guide of wiTECH MicroPod 2 Chrysler diagnostic tool setup.

If your dealership purchased a new microPOD and you would like to convert your existing microPOD for using with wiTECH 2.0 System, you need to download and install the microPOD Setup Utility to configure/setup your microPOD for wiTECH 2.0.

NOTE: microPODs with a serial number beginning with “WFP” should NOT be used with this utility.

PROCEDURE

If you have a restricted network, you must first make sure that all sites listed below are enabled to be able to successfully use microPOD Setup Utility and the wiTECH 2.0 System.

mixpanel.com

bugsnag.com

fcawitech.com

chrysler.com

dealerconnect.com

jeep.com

witechsystem.com

Note: Please disable any Anti-Virus software that you have on your computer in order to allow the microPOD Setup Utility to install and run properly.

How to download and install the microPOD Setup Utility

IMPORTANT: Once the microPOD is configured using the  auto scanner diagnostic tool microPOD Setup Utility, all the microPOD Wireless Settings will be deleted. You will be required to follow the instructions from the KB link titled “How to configure a Wireless Profile on a microPOD II”.

To download the application, please login to DealerCONNECT > Service > wiTECH Information > microPod Setup Utility

Step 1

Click on “Run” to begin the downloading process of microPOD Setup Utility.

28-1

Step 2

The install wizard will appear to install the wiTECH Driver x64 onto your computer if your PC has not been installed with wiTECH 1.0 application.

If the PC has been installed with wiTECH 1.0 App, you will not see the screen below and proceed to Step 6. Otherwise, click “Next” to proceed.

28-2

Step 3

Read the License Agreement carefully, and accept the terms in the license agreement. Then, click “Next” to continue.

28-3

Step 4

You are now ready to start the actual installation of the driver. You now need to click on “Install” for it to start.

28-4

Step 5

This will now install the wiTECH Driver x64. Once complete, the program will automatically proceed to the next step.

28-5

Step 6

Once the installation has completed, click “Finish”. Proceed to the following section, “Using the microPOD Setup Utility”.

28-6
Using the microPOD Setup Utility

NOTE: Please make sure that your computer is connected to the internet and the microPOD is connected to the computer via USB before starting this process. This application will help you configure your microPOD for wiTECH 2.0 from CnAutotool.com.

Step 1

Start microPOD Setup Utility by clicking the icon on the desktop:

28-7

If the microPOD Setup Utility that is installed is out of date, you will be forced to update to the newer version of the application.

Step 2

Please make sure your microPOD is connected to the PC via USB.

28-8

Step 2a

If you see the following screen you may not be connected to the internet, or have a firewall that blocks 1 or more of these websites.

28-9

Select “Continue” on the next screen for wiTECH 2.0 Device Setup and Configuration.

28-10

NOTE: If you only want to configure the wireless setting on a microPod device to use with wiTECH 2.0, click “Wireless Configuration” and follow instructions.

Select “Continue” on the next screen to begin attempting to connect to the microPOD device.

28-11

Step 3

Once your microPOD II is recognized by the utility, select “Continue” to proceed with the configuration.

28-12

NOTE: microPODs with a serial number beginning with “WFP” should NOT be used with this utility.

Step 3a

If the utility does not find the microPOD device, please assure that the microPOD is connected via USB and click “Refresh”

28-13

Step 4

The following screen will appear for up to 15 minutes while the microPOD device is being configured.

28-14

Step 5

The following screen will appear when the utility completed the configuration of microPOD for wiTECH 2.0 Application.

Note: After microPOD Setup Utility is ran, all existing wireless networks will be removed from the microPOD.

Important! Leave the microPod Setup Utility window running as you will be required to complete software updates to the microPod device before configuring the wireless.

Step 5a

Login into wiTECH 2.0. The microPOD II that was just configured using the microPOD Setup Utility should appear in the wiTECH 2.0 discovery. You will need to update the operating system of your microPOD II before it can be used with Micropod 2 Chrysler MicroPOD II. Click “Continue”, and your web browser will redirect you to the page to download and install the operating system update as seen in the following step.

28-15

*NOTE: If microPOD II does not show up in discovery after a couple of minutes please power cycle your microPOD II by unplugging it and plugging it back in.

Step 6

Click “Update Now” and your microPOD II should continue to the update screen. Once updating, do not interrupt your microPOD II at any point until the update is complete.

28-16

*NOTE: This can take upwards of 9 minutes. It is normal activity for the microPOD II to reboot.

28-17

Step 7

Click “OK” and you will be navigated back to the wiTECH 2.0 discovery page. Your microPOD II should appear updated and ready for use.

28-18

28-19

Step 8

With the microPod Setup Utility still running, configure wireless on the wiTECH microPod II device.

Enjoy!

V17.04.27 Chrysler VCI Pod Micropod 2 wiTECH Software Free Download

Chrysler Micropod 2 wiTECH v17.04.27 Software Free Download
V17.04.27 Chrysler wiTech MicroPod 2 Chrysler Micropod VCI original software released. Chrysler Witech Micropod 2 with V17.04.27 witech 2.0 Dealer connect software support Chrysler till 2017. Witech Micropod 2 also cover Dodge, Jeep, and Fiat vehicle diagnostics. Below CnAutotool.com share wiTECH v17.04.27 Chrysler micropod 2 original software free download link and installation guide here.

WiTech Micropod ii Chrysler VCI Pod 2 Diagnostic/Programming Tool

http://forobd2tool.com/wp-content/uploads/2017/06/14/8-1.jpg

witech micropod 2 V17.04.27 Chrysler VCI Pod Professional Diagnostic Tools Micropod 2 wiTECH Software

It’s wiTECH software crack
No need password for wiTECH MicroPod 2 login
No need wiTECH software license
Tested OK by professionals
Safe to use with wiTECH MicroPod 2 clone
Operation system of wiTECH 2 download: Windowns XP/7

CnAutotool.com wiTECH Micropod 2 v17.04.27 software Installation Tips:
1.The date of the computer must be the current time
2.The computer must be connected to the Internet
3.Connect the machine to the MicroPod 2 to open the wiTECH software
4.The system may ask you to turn off the software and turn it on for registration again.
5.Repeat it for several times.
Then you can use it normally

wiTECH MicroPod Kit 2 v17.04.27 Software Crack Install Guide:
Step 1 install AdobeAIRInstaller.exe
Step 2 install jre-6u45-windows-i586.exe
Step 3 install wiTECH_Install_17.04.27.exe
Step 4 Restart the computer
Finish Installation

Witech Software for Chrysler Micropod 2 Display:
http://forobd2tool.com/wp-content/uploads/2017/06/14/8-2.png

Chrysler Diagnostic Tool wiTech MicroPod 2 V17.02.3

Our Chrysler Diagnostic Tool wiTech MicroPod 2 has latest update version V17.02.3 now. It can work more stable than WITECH VCI POD Diagnostic Tool. It can work on Chrysler, Dodge, Jeep, and North American Fiat vehicles equipped with CAN BUS technology. If you are looking for a special OEM Dealer diagnostic tool for Chrysler, Dodge and Jeep with full access to the vehicles that you are working on, wiTech MicroPod 2 is definitely your best choice.

Here are 6 highlight of getting wiTECH MicroPod 2 Diagnostic Tool:
1. the copy is 1:1 of the genuine, of high quality and good stability, its connector matches the car OBD plug perfectly.
2. With high-quality USB cable which transfer data stably and reliably
3. The package is anti-static, moisture-proof, anti-electromagnetic interference
4. Works with your current wiTECH software
5. No smart cables required
6. No drivers needed

Chrysler Diagnostic Tool wiTECH MicroPod ii Software needs to be installed in the laptop with Windows 7 32-bit operating system or higher. The packages includes one piece of MicroPOD II Interface and one USB cable and one CD with the latest software. For detailed information, please check http://www.cnautotool.com/goods-5106-Chrysler+Diagnostic+Tool+wiTech+MicroPod+2.html