Program Passat 4th IMMO Key with OBDSTAR X300 DP

Here is the instruction on programming VAG Passat 4th IMMO Key by using OBDSTAR X300 DP key programmer and OBDSTAR RFID Adapter (adapter chip reader for VAG 4th 5th IMMO function)

Guide:
Dissemble the dashboard instrument
Connect OBDSTAR X300 DP with VCI and Dash
Turn ignition on (If it is the smart key, turn ignition OFF then turn it ON)

http://forobd2tool.com/wp-content/uploads/2017/06/14/18-1.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/14/18-2.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/14/18-3.jpg

Make sure dash instrument is black

http://forobd2tool.com/wp-content/uploads/2017/06/14/18-4.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/14/18-5.jpg

Reading eeprom data
http://forobd2tool.com/wp-content/uploads/2017/06/14/18-6.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/14/18-7.jpg

Save data
Read IMMO data
http://forobd2tool.com/wp-content/uploads/2017/06/14/18-8.jpg

Turn ignition on (If it is the smart key, turn ignition OFF then turn it ON)
Make sure dash instrument is black
Read VIN, CS code and PIN and key info

http://forobd2tool.com/wp-content/uploads/2017/06/14/18-9.jpg
Select Generate OEM Dealer Key (Can start car)
Turn ignition on
Connect OBDSTAR RFID adapter with X300 DP

http://forobd2tool.com/wp-content/uploads/2017/06/14/18-10.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/14/18-11.jpg

Insert the original key (chip) into RFID adapter

http://forobd2tool.com/wp-content/uploads/2017/06/14/18-12.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/14/18-13.jpg

RFID Indicator flashes, remove the first key chip
Follow X300 DP prompt to insert second key chip
RFID indicator flashes, reading key data
dash indicators turn on

http://forobd2tool.com/wp-content/uploads/2017/06/14/18-14.jpg

Generating dealer key in progress

http://forobd2tool.com/wp-content/uploads/2017/06/14/18-15.jpg

Generate dealer key success

http://forobd2tool.com/wp-content/uploads/2017/06/14/18-16.jpg
Test the new key, it works!